Loading ...
Loading ...
Loading ...
NOTE
Do not apply
excessive
for
c
e (
both s
ides)
When hanging the unit, ensure a balance of the unit, check to ensure safety and lift up smoothly.
Do not remove any packing materials.
Hang the unit with two wire ropes, as shown in Fig. 3.1.
(3)Hang the unit without wooden pallet, as shown in Fig.3.2.
*Do not push the bottom base by fork.
*Do not use roller.
In case of transportation after unpacking, protect the unit with splints or cloth.
3.2 Hanging Method
WARNING
Check to ensure that no foreign matters left in the outdoor unit before installation and test run.
Otherwise, a fire, failure or personal injury, etc. may occur.
5
Fig. 3.1 Hanging Work for Transportation
CORRECT
Rope Position
Wire Rope
INCORRECT
Wire Rope
Square Hole
Apply wire ropes
through circular holes
Do not remove
corrugated paper frame
and plastic bands
Wire Rope
Corrugated Paper Frame
Apply rope on the splints or
corrugated paper with thickness
greater than 19/32in. (15mm)
Angle of wire rope
greater than 60°
Do not apply any
force
(Both Sides)
Do not apply excessive force the square holes with forks or
other materials. The bottom of the unit may be deformed.
Do not apply
any force .
(Both Sides)
Do not remove
corrugated paper frame
and plastic bands
Corrugated Paper Frame
Wooden Pallet
Wire Rope
Carefully guide the sling belts through
both side slots of the wooden pallet.
Bottom corners: Attach four
5/8in (15mm) thick cardboard
padding on both sides at
this point for protection.
Apply rope on the splints
or corrugated paper with
thickness greater than
19/32in. (15mm).
Angle of wire rope
than 60°
Bottom corners: Attach four
5/8in (15mm) thick cardboard
padding on both sides at
this point for protection.
Circular Hole
Fig. 3.2 Hanging Work without Wooden Pallet
Loading ...
Loading ...
Loading ...