Loading ...
Loading ...
Loading ...
Establishing a radio link | Synchronizing the receiver and transmitter
230
Connecting to the EW-D EM receiver /
synchronizing the EW-D EM
To establish a radio link between the transmitter and receiver,
we recommend the following procedure.
In order to establish a connection between a receiver and
transmitters of the EW-D series, the devices must always be
synchronized with each other.
To successfully connect a receiver and a transmitter, both de-
vices must have the same frequency range.
Step 1: Set a free frequency
We recommend using the AUTO SCAN function, as this is the
most reliable way to identify free frequencies (see "AUTO
SCAN menu item").
If you know free frequencies in your area, you can also set the
frequency manually (see "CHANNEL menu item" or "TUNE
menu item").
Step 2: Pairing a receiver with a transmitter
▷Short-press the SYNC button on the receiver.
The blue DATA LED flashes.
►
▷Short-press the SYNC button on the transmitter.
The blue DATA LED flashes.
►
The transmitter and receiver will be paired. Once the link is
established, the LINK LED on both units will light up green.
Be sure to press the SYNC button on all devices only briefly
(less than 2 seconds). Holding the SYNC button longer than
this will start the firmware update mode and cancel the syn-
chronization process.
Loading ...
Loading ...
Loading ...