Loading ...
Loading ...
Loading ...
7
ENG
Using the Double Rings
Damaged power cables should be replaced by a competent person or qualified electrician.
For domestic use only.
Never place an empty pan on the hob as this will cause an error message to appear on the control
panel.
When a cooking zone has been on for a long time, the surface remains hot for some times afterwards
so do not touch the ceramic surface.
For sealed foods, please do not heat them before opening removing the lid so as to avoid any dangers
of explosion due to heating expansion.
If the surface of the hob is cracked, disconnect from power supply to avoid any possibility of electric
shocks.
Do not place rough or uneven pans on the hob, as they could damage the ceramic surface.
Avoid banging pots and pans down on the hob. The ceramic surface is tough but not unbreakable.
Do not put detergents or flammable materials beneath the hob.
Care
Warning
Always switch off the electricity supply before performing maintenance work.
In the event of a fault, contact customer services.
CARE AND MAINTENANCE
• You can set the double zone after the zone is working.
• You can set the zone working by double rings or single ring.
– The back left heating zone
can be operated as two zone operations. It can be selected as full power
operation 2300W or 1150W operation when the back left heating zone is operating press
to select full
power operation 2300W or 1150W operation.
– When the back left zone display show
and alternately, this means that the back left heating zone is at full
power operation (2300W).
– When the back left zone display show
and alternately, this means that the left heating zone is at 1150W
(inner ring) operation.
Loading ...
Loading ...
Loading ...