Auto Joe 24V-AJV-CT Sun Joe 24-Volt IONMAX High-Volume Inflator W/Adapters

OPERATOR’S MANUAL - Page 9

For 24V-AJV-CT.

PDF File Manual, 16 pages, Read Online | Download pdf file

24V-AJV-CT photo
Loading ...
Loading ...
Loading ...
9
2. Depending on your Snow Joe
®
+ Sun Joe
®
charger
model, how to recharge your lithium-ion battery will vary.
You may either insert your 24-volt battery into the
24VCHRG-QC Quick Charger (sold separately) or the
24VCHRG-DPC Dual Port Charger (sold separately)
(Figs. 2 – 3).
3. The battery indicator LEDs will illuminate one by one
during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
4. The 24VCHRG-QC Quick Charger (sold separately) and
the 24VCHRG-DPC Dual Port Charger (sold separately)
are also equipped with additional charging indicating
lights which will indicate the charging status (Figs. 2 – 3).
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery.
mWARNING! This charger does not automatically turn o
when the battery is fully charged. Please take care not to leave
the battery plugged into the charger. Switch o or unplug the
charger at the mains when charging is complete.
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
This high volume inator requires no assembly in order to be
used. Any of the three adpaters may be used for specic tasks.
Attaching the Adapters
This high volume inator is equipped with three inator
adapters. It is recommended to leave them connected, as
disconnecting the adapters may make them easier to lose.
1. To attach an adapter to the inator end, align the notches
on the high volume inator nozzle with the slots on the
adapter of your choice and slide together. Twist the
adapter to lock into place (Fig. 4).
Fig. 1
Push lock
button
Fig. 2
Battery pack
24VCHRG-QC
quickcharger
(Sold separately)
red
Charging
green
Fully
Charged
Fig. 3
Battery pack
24VCHRG-DPC
dual port charger
(Sold separately)
red
Charging
green
Fully
Charged
Loading ...
Loading ...
Loading ...