Loading ...
Loading ...
Loading ...
7
function automatically.
10. The “ADD WATER” indicator will light up when the water reservoir is lack of water
and the ice-making cycle will stop automatically. At that time, remove the ice basket and
add water to the water reservoir, and then press “ON/OFF” key again to restart the
ice-making cycle.
11. When you have got your desired amount of ice, stop the ice making cycle by pressing
the “ON/OFF” key and unplug the unit from the wall outlet.
12. Open the top lid and transfer the ice to a freezer.
13. Allow the ice maker to reach room temperature.
14. Suggest replacing the water every a week. Please empty the water reservoir if the ice
maker is not used for a long time.
CLEANING AND MAINTENANCE
To keep your ice tasting fresh and your ice maker looking great, we recommend cleaning
your ice maker once per week.
1. Stop the ice-making cycle by pressing the “ON/OFF” key, unplug the ice maker from
the wall outlet and allow it to warm up to room temperature.
2. If residual water is found in the ice tray, gently push the ice tray back so that all water
drains into the water reservoir.
3. Move the appliance forward to a place 2.36 inch away from the working table and
open the drain plug to drain out excess water (see Fig.3, Fig.4 and Fig.5).
4. Remove the ice basket.
5. Clean the ice maker interior with a soft cloth soaked with warm water and vinegar,
then rinse with clean water and then drain all the water.
6. Replace the drain plug well in position. Wash the ice basket and ice scoop in warm
soapy water. Rinse and dry.
7. Clean the exterior of the ice maker with a soft damp cloth. Use a mild dishwashing
soap, if necessary.
NOTE:
1) Do not use organic solvent, boiled water, detergent, strong acid and strong alkali etc.
for cleaning.
Loading ...
Loading ...
Loading ...