Loading ...
Loading ...
Loading ...
12
Light High speed Middle speed Low speed Power
IMPORTANT
NOTE!
Pay attention when operating the hood simultaneously with devices that
work by burning the ambient air with fuel (such as gas heaters). The
burning may be affected because the hood discharges air in the room to
the outside.
This advice does not apply to hoods not having an outside exhaust.
Using your range hood
For best performance, you should switch on the range hood 15 minutes before starting
to cook and leave it to run for appr
oximately 15 minutes after the end of cooking.
When the hood is powered on, there will be a beep, and enter the off state.
Power-
off:
The power button is off, the power indicator is off, and it is in the off state.
Pressing the speed button is invalid at this time.
Power-on:
In the powered-on state, press the power button, the power indicator
light is on, and it is in the power-on state. All buttons will work at this time.
Power button (Delay bu
tton):
The powered-on and the powered-off state can be toggled. When the fan is running,
press the power button to enter the delay state, the delay time is 15 minutes. When the
delay time is reached, it enters the off state. In the delay state, the delay will not be
affected when the speed is switched between each other. Press the power button
again to enter the off state.
Speed button:
In the powered-on state, press any speed button, the corresponding indicator light will
turn on, and the fan will work at this speed. During the operation of the fan, the fan
speed can be switched to each other and correspond to the speed indicator. The fan
can also be turned on or off by pressing the button repeatedly.
Light button:
In the powered-on state, press the light button, the lighting indicator lights up, and the
light works. Press the button again, the lighting indicator is off, the light stops
w
orking.
Note: Light button on or off is not controlled by the power button.
Loading ...
Loading ...
Loading ...