Loading ...
Loading ...
Loading ...
Use To
Timeouts
Standby Mode
Disabled
1–240
Set the amount of time before the printer enters a lower power
state.
Note: 15 minutes is the factory default setting.
Timeouts
Sleep Mode
Disabled
1–240
Set the amount of time the printer waits after a job is printed
before it goes into a reduced power state.
Notes:
• 20 minutes is the factory default setting.
• Lower settings conserve more energy, but may require
longer warm‑up times.
• Select the lowest setting if the printer shares an electrical
circuit with room lighting.
• Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print.
Timeouts
Hibernate Timeout
Disabled
1–3 hours
6 hours
1–3 days
1–2 weeks
1 month
Set the amount of time the printer waits before it enters
Hibernate mode.
Note: 3 days is the factory default setting.
Timeouts
Screen Timeout
15–300
Set the amount of time before the display returns to a Ready
state.
Note: 30 seconds is the factory default setting.
Timeouts
Print Timeout
Disabled
1–255
Set the amount of time the printer waits to receive an end‑of‑job
message before canceling the rest of the print job.
Notes:
• 90 seconds is the factory default setting.
• When the timer expires, any partially printed page is
printed, and then the printer checks to see if any new print
jobs are waiting.
• Print Timeout is available only when using PCL emulation.
Timeouts
Wait Timeout
Disabled
15–65535
Set the amount of time the printer waits for additional data
before canceling a print job.
Notes:
• 40 seconds is the factory default setting.
• Wait Timeout is available only when the printer is using
PostScript emulation.
Understanding the printer menus 117
Loading ...
Loading ...
Loading ...