Tripp Lite B122-000-4K6 Owner's Manual

Loading ...

Installation

Notes:

1. Test to make sure the entire installation works properly before pulling cables through

ceilings/walls.

2. The B122-000-60 and B122-000-4K6 have been designed for use with Tripp Lite P568-Series

HDMI cables. To ensure maximum distance and performance, it is recommended that you use

Tripp Lite P568-Series HDMI cabling. For distances over 75 ft. (23 m), 24 AWG cable such as

Tripp Lite’s P568-100-HD is required.

3. Although most installations will not require power, a Micro USB port is provided in the event

power is needed. If an image does not appear after performing the following steps, connect a

Micro USB cable from the port on the unit to a USB computer, monitor or USB wall charger

port, such as Tripp Lite’s U280-002-W12.

Connect the longer HDMI cable between the source and the SOURCE port on the

B122-000-60 or B122-000-4K6.

Note: When transmitting a 1080p (60 Hz) signal, the HDMI cable connecting the source to the

B122-000-60 must be no longer than 125 ft. (38 m).

Connect the shorter HDMI cable between the HDMI monitor and the DISPLAY port on

the B122-000-60 or B122-000-4K6.

Note: The HDMI cable used to connect the monitor to the B122-000-60 or B122-000-4K6

must be no longer than 16 ft. (5 m).

MONITOR BLU-RAY

Specifications

Model B122-000-60 B122-000-4K6

Max Resolution 1920 x 1200 @ 60 Hz

(up to 125 ft. / 38 m)

3840 x 2160 @ 60 Hz

(up to 50 ft. / 15 m)

Compliance HDCP 1.4, HDMI 1.4 HDCP 2.2, HDMI 2.0

Operating Temperature 32°F to 104°F / 0°C to 40°C

Storage Temperature 5°F to 122°F / -15°C to 50°C

Relative Humidity 0 to 85%, non-condensing

19-01-055-93372B.indb 3 1/11/2019 11:28:22 AM

Loading ...

Tripp Lite B122-000-4K6 HDMI Signal Booster Extender, 4K 60 Hz, F/F, 444, Up to 50 ft., TAA