Loading ...
Loading ...
Loading ...
Parameter Description
●
Snapshot Sensitivity : Set snapshot sensitivity during the
face detection. It is easier to detect face with higher
sensitivity.
●
Optimized Time : Set a period to capture the clearest
picture after the camera detects face.
Face Exposure
Click
next to Face Exposure to make face clearer by
adjusting lens aperture and shutter.
Target Face Brightness Set the face target brightness, and it is 50 by default.
Face Exposure Interval
Detection Time
Set the face exposure interval detection time to prevent image
ickering caused by constant adjustment of face exposure. It is
5 seconds by default.
Step 5 Click Apply.
8.10.2 Rule Conguration
Set the detection scene and rules, including people, non-motor vehicle, and motor vehicle.
Prerequisites
●
Select AI > Smart Plan, and enable Face & Body Detection.
●
You have congured the parameters on the Global Cong page.
Procedure
Step 1 Select AI > Smart Plan
Step 2 Click next to Face & Body Detection , and then click Next.
Step 3 Click the Rule Cong tab.
Figure 8-48 Rule conguration
Step 4 Click next to Enable to enable the face detection function.
Step 5 (Optional) Click other icons at the right side of the image to draw detection area,
exclusion area, and lter targets in the image.
●
Click
to draw a face detection area in the image, and right-click to nish the
drawing.
Operation Manual
163
Loading ...
Loading ...
Loading ...