Loading ...
Loading ...
Loading ...
www.PyleUSA.com
5
objects in the screen for 5 seconds, the car DVR will stop
recording. If you need to exit the motion detection mode,
long press “MENU” button for 3 seconds to exit in standby
mode.
7. Collision Sensor Function
Built-in crash sensors (G-sensor). If there is a vehicle
collision, the camera will lock current video le on the
accident happened 10 seconds before and after data. Also
there is locked icon shown on the lower left of the screen.
The locked le won’t be overwritten by loop recording.
(The sensitivity of the G-sensor can be adjusted according
to using condition.)
8. One Key Lock Function
The car DVR has one key lock function, during recording,
you can short press the Mode button to lock current video
le which you want to preserve and will not be covered by
loop recording.
9. Date and Time Setting
In standby, short press the “MENU” button to enter the
system setup menu. Short press “up /down” button move
to the “Clock Setting” option. Short press “OK” to go into
the menu settings.
Attention: In order to keep ensured record evidence of
accident date and time, please set the correct time before
using the car DVR.
Loading ...
Loading ...
Loading ...