Loading ...
Loading ...
Loading ...
BISSELL.ca 7
Using the Tools
(continued)
HydroRinse™ Tool
1. Hold the hose and tool in
an upright position with the
machine ON. Hold down the
trigger for 30 seconds. Be sure
to empty the dirty water tank
after use (see below).
2. You can store tool on
machine, as shown.
After-Cleaning Care
Go to support.BISSELL.ca for how-to videos.
1. Empty and rinse the dirty
water tank after each use, OR
when dirty water reaches the
indicated maximum FULL line.
2. To remove the tank, lift up
the dirty water tank retainer
lever and remove the tank from
the machine.
3. Empty tank by pouring dirty
water into sink or toilet. Place
tank back onto machine.
Cleaning the Tools
1. To disconnect the cleaning
tools, push down on the button
above the hose grip and pull
straight off. (Do NOT twist tool
to remove it.)
2. The front cover of most
tools can be removed for easy
cleaning. If so, you will see a
button on the top of the tool
that will allow you to slide the
tool cover off.
3. Rinse with water and air dry.
Loading ...
Loading ...
Loading ...