Loading ...
Loading ...
Loading ...
en
36
36
Setting up the water
softener
In order to provide satisfactory rinsing
results, the dishwasher requires soft
water, i.e., containing little or no lime,
otherwise water stains will be left behind
on the dishes and interior containers.
If the tap water exceeds a certain level of
hardness, it must be softened, i.e.,
decalcified, so that it can be used in the
dishwasher.
This is achieved by adding a special salt
to the water softener inside the
dishwasher.
The water softener, that is the required
amount of salt, is set up according to how
hard the tap water is.
The softening system must be adjusted
before the appliance is used for the first
time or if the water hardness changes.
Determine the degree of hardness
of your tap water. Your water utilities
company or customer service will
advise you.
Switch on the appliance with the main
switch
1
. The main menu is
displayed (if switching on the appliance
for the first time, only when a language
has been selected and dispensers have
been filled with salt (if required) and
rinse aid).
Auto Wash
Options Start
Press the “Options” button until
the word ”Hardness” is displayed.
Using button or , select
a value between 0 and 7 which
corresponds with the degree of
hardness of your tap water in the
following table. A value of 4 has been
set at the factory.
Press button . The value has now
been stored and you are returned to the
main menu.
Loading ...
Loading ...
Loading ...