Loading ...
Loading ...
Loading ...
16.
9.
With the carrier open on one side and the baby facing
away from you, carefully slide the baby into the carrier
by tting his/her leg through the Leg Opening on the
closed side of the carrier.
*IMPORTANT! Keep one hand on the baby until all buckles and straps
are properly fastened.
*Make sure your baby’s leg goes through the Leg Opening on the
closed side of the carrier.
10.
While supporting the baby with one hand, fasten the
other Side Closure Buckle.
11.
Attach both Head Support Buckles, making sure that
the Head Support area remains folded down. Adjust
the size of the Head Support area by pulling both of the
Head Support Straps.
12.
To adjust how high the baby rides on your chest, lift
the baby slightly and pull the Shoulder Strap Adjuster,
rst on one strap, then on the other. The Shoulder
Strap Adjusters should be equal lengths after
adjusting. When the baby is properly positioned, you
should be able to tilt your head forward and kiss the
top of your baby’s head.
*NOTE: The arms of smaller babies should be positioned below the
Head Support Buckles. Larger babies’ arms should be above the
buckles, and rest comfortably over the folded-down Head Support.
*IMPORTANT: Always make sure baby’s face, nose, and mouth are not
obstructed. Check your baby’s position regularly. Your baby should be
centered in the carrier in a seated position with arms and legs extended
and not constricted by the carrier. It is extremely important to avoid any
slouching in baby’s position. A slouching position can restrict baby’s
airways. Baby’s head should be upright. Baby’s chin should never rest
on baby’s chest. This can result in closing or partially closing baby’s
airway.
15.
5.
Pull the webbing strap on the Back/Chest Strap to
tighten. The Shoulder Straps should be wide and the
Back/Chest Strap should be straight across your back.
* NOTE: The height of the Back/Chest Strap can be adjusted
by sliding the Back/Chest Strap to the desired height. The
strap should lay in a comfortable position on your upper back.
6.
Fasten the Waist Belt & Buckle around your waist and
pull the webbing to tighten.
*NOTE: People with longer torsos may nd a higher belt
position more comfortable (closer to the navel); shorter people
may wish to wear the belt more on the hips.
* IMPORTANT! ALWAYS ensure that the Waist Belt ts
securely against your body at all times without creating a gap.
7.
Fasten the Side Closure Buckle on one side. The step
will create a Leg Opening on the closed side.
8.
Fold down the Head Support and fasten the two Head
Support Snaps to the carrier body.
CORRECT INCORRECT
Loading ...
Loading ...