Loading ...
Loading ...
Loading ...
Tool Operation
Read sections titled “Safety Warnings” before operating tool.
WARNING
Do not use this product if it is not completely assembled or if any parts
appear to be missing or damaged. Use of a product that is not properly and completely
assembled or with damaged or missing parts could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories or attachments not
recommended for use with this product. Any such alteration or modification is misuse
and could result in hazardous conditions possibly leading to serious personal injury.
If any parts are damaged or missing, please call 1-800-543-4596 for assistance.
MODEL ADAPTER COMPATIBLE TOOLS
DS530-S1 MB0184 SENCO • SG2510, SG4100
DS530-M1 MB0186 MAKITA • FS2200, FS2500, FS4200, FS6200, XSF03, XSF04, XSF05
DS530-D1 MB0183 DEWALT • DW252, DW253, DW255, DW257, DW266, DW272, DW276
MB0185 DEWALT • DCF624
SOLD SEPARATELY MB0187 MAKITA • FS2701
INSTAllING A DS530-S1 OR DS530-M1 ADAPTER AND ATTACHMENT
1. Unplug tool from electrical supply or remove battery before installing attachment.
2. Remove the manufacturer’s nose cone from the tool.
3. Remove manufacturer’s bit and holder if present.
4. Choose the adapter which matches the screwdriver model and brand you are using.
5. Attach the adapter onto the screwdriver ensuring it is fully seated and secure, tighten all set screws.
NOTE: If you want to use an extension pole with the attachment, install that, now. See instructions for
using the extension pole on page 11. Otherwise, continue to next step, below.
6. Install the appropriate Senco bit, making sure it is fully seated (this may require some force.)
7. Slide the attachment onto the adapter. Make sure there’s no gap between the attachment and the adapter.
Tighten clamp. Adjust the screw with a 2.5mm hex key if necessary to provide more or less clamping
force. This should only be tightened enough to prohibit the attachment from easily rotating on the adapt-
er or sliding off with minimal force. Over-tightening will only make it harder to unlock the clamp during
removal and could damage clamp components.
locked Unlocked bit Type DS530
EA0314 Phillips
EA0315 Square
EA0316 Rex
TOOl USE
7
Loading ...
Loading ...
Loading ...