Loading ...
Loading ...
Loading ...
ge.com
Burner capproperly seated
Burner cap not properly seated
Burner Head and Cap Replacement
Replace the burner head onto the
burner base, making stlre that the head is
properly oriented over the burner base
and the electrode. Make sure to place the
coFi'ect btlFner head on the coFi'ect
burner base and that the bm'ner head sits
level on the bm'ner base. The bm'ner
heads are not interchangeable.
Replace the bm'ner cap onto the bm'ner
head, making sm'e to place the correct
burner cap on the correct bm'ner head.
The burner caps are not interchangeable.
_dso, make sm'e that the bm'ner caps are
properly seated on the btm_er heads.
JGP940and JGP970(aft burners)
JGP933and JGP963
(right front burner only)
Burnercap
Burnerhead
Locater _lectrode
indentations base
Make sure thepflTsf17theburner headsmatch
theburner baseflTdentafionsand that they are
properly seatedin them by rotating theheads
until they arelevel
JGP328,JGP330,JGP628,JGP630,
JGP933,JGP945,JGP963,JGP975
Stability Burnerhead Z I 1 J
charnber__
1
_ Electrode
Burnerbase
Make suretheslotin theburnerheadispositioned
overthe electrode. Theburner cap has three
to fourpflTs.When replacing the cap, makesure
noneof thepflTssitsin thestability chambe_
JGP945and JGP975
(right front burner only)
Burnercap
<D
assembly
Orifice
Burner
Electrode base
Make sure the hole f17the burner head assembly
is positioned over the electrode and that the burner
head is fully inserted flTside the burner base. A
small gap between the base and head is normal
Burner Grates
(Onsomemodels)
"OUTSIDE.... INSIDE.... OUTSIDE"
edge edges edge
(Onsomemodels)
"INSIDE"
"OUTSIDE"edge _ "OUTSIDE"edge
Tabs
34mr cooktop has professional sb'le
grates. These grates are designed t0r
specific positions. These grates should
only be used in their proper positions;
they should not be interchanged. For
yore" convenience, the tmdersides ot
the left and fight grates are marked
"OUTSIDE" and "INSIDE", Make sm'e
that the sides marked "OUTSIDE" are
fi_dng the outer edge of the cooktop and
the sides marked "INSIDE" are
fi_cing each othe_: _M1grates
should touch once they are
flflly assembled on the
cooktop Stli'l'ilce,
For cooktops with three grates,
make sure that the tabs on
either side of the center grate
fit into the slots located on the
"INSIDE" edge ot the side
grates.
I,ifl the bm'ner grates out only when
cool. Grates should be washed regularly
and, of cotlrse, after spillovers. Wash
them in the dishwasher or in hot, soapy
water and rinse with clean water: _,_l_en
replacing the grates, be sure they are
positioned securely over the burners.
_Mthough they are din'able, the grates will
gradually lose their shine, regardless of
the best care you can give them. This is
due to their continual exposure to high
temperatures. Ybu will notice this sooner
with lighter color grates.
Do not operate a bm'ner for an extended
period of time without cookware on the
grate. The finish on the grate may chip
without cookware to absorb the heat.
NOTE:Donotcleanthegratesina
self-cleaningoven.
11
Loading ...
Loading ...
Loading ...