Loading ...
Loading ...
Loading ...
VII. t - HOT FOOD UNITS, ADJUSTING THE THERMOSTAT & TURNING THE UNIT OFF/ON:
This parameter sets the desired cabinet temperature. Please note that hot food units are delivered
from the factory set to the OFF position.
Follow the instructions to enter the customer access code on page 11. When the control reads
Thermostat Set Point High, press the set button .
Use the arrow keys to adjust the temperature to your desired setting. When the display
shows the temperature you want press the set button . The display will then read
Thermostat Set Point High. You can use the up or down arrow keys to scroll to
the next parameter or press the alarm cancel button to exit.
VII. u - HOT FOOD UNITS, TURNING THE UNIT OFF/ON:
After the temperature has been set, the customer can continuously turn the unit OFF and then back
ON to the same temperature. To turn the unit ON /OFF press the alarm cancel button , (please
note that this feature is not available on versions of the control manufactured prior to September
2000), or if an alarm warning condition is present, use the alternative ON/OFF activation method.
To turn the unit ON/OFF using the alternative method, press both arrows at the same time,
the set temperature will remain in memory.
VII. v - HOT FOOD UNITS, TEMPERATURE ADJUSTMENT:
Press the SET button and the UP ARROW button at the same time. The display will
flash the current temperature setting or OFF (if the unit is turned off). Use the UP or DOWN
ARROW buttons to adjust your desired temperature setting (temperature range is 140° thru
180° F, and OFF) then press the SET button . The display will go back to reading cabinet
temperature. If OFF is selected. the display will then read OFF. NOTE: If you wish to change the
set temperature at anytime follow this procedure.
These models also include a “One-Time Temperature Setting Adjustment” feature. Upon start-up,
the unit will warm-up to the last temperature you had set for it, unless changed.
-20-
VII. INTELA-TRAUL
®
(continued)
SET
SET
SET
SET
Loading ...
Loading ...
Loading ...