Loading ...
CHARGING YOUR
PRODUCT
1
Plug in the charger, then attach the battery pack to
the charger by aligning the ribs on the battery
pack to the grooves in the charger.
2
Slide the battery pack into the charger.
NOTE: The lights on the battery will show
the state of charge. If the light on the charger
flashes red, there is an error with the battery
or the charger. If this occurs, disconnect and
reconnect the battery or call customer service
for support. Once charge is complete, lights on
the battery and charger will turn o.
3
To remove the battery pack, press the latches and
pull up.
NOTE: During charging, the pack and
ambient temperature should be between 41 to
86° F (5 and 30° C). The charger will sense if the
pack, or ambient temperature, is too cold or too
hot, and will return an error code (red LED will be
on) and not charge the pack.
ASSEMBLY
Fully assemble product prior to use.
1
Fit the dirt cup onto the hooks, then rock it up into
the handheld so it secures into place.
2
Push the reach wand down onto the powered
nozzle until it clicks into place.
3
Push the handheld down onto the reach wand
until it clicks into place.
NOTE: Fully charge battery before first
use. This will take 3-4 hours. Due to federal
regulations, the battery does not come fully
charged.
STORING YOUR VACUUM
1
Choose the desired location, then place the mount
on the wall at the desired height. Mark the wall
anchor locations. Install the anchors and screw
the mount to the wall.
2
Store the vacuum by firmly pressing the product
into the wall mount to secure.
NOTE: Accessories can be stored by
sliding them onto the top and bottom of the wall
mount.
NOTE: Vacuum can be locked into upright
position, but is not meant to be left standing
unattended.
3
Slide the battery pack into the charger.
OPERATION
CAUTION: Put product away after use
to prevent tripping accidents.
CAUTION: Not to be used for
grooming a pet.
USING YOUR PRODUCT
1
• ON/OFF power button.
• Unit turns on in Default mode.
• To increase runtime for hard floors and
everyday messes.
• To increase suction for more embedded
messes.
• Battery LED is illuminated WHITE when on
and RED when battery is low.
NOTE: Pressing the - or + will increase or decrease
the power level from where it is currently running.
HANDHELD MODE
WARNING: To avoid serious personal
injury, always remove the battery pack from
the product when connecting or disconnecting
accessories.
1
Press the release button on attachment and pull
to separate.
2
Push the chosen accessory into the handheld until
it clicks into place.
CLEANING UP HIGH
WARNING: To avoid serious personal
injury, always remove the battery pack from
the product when connecting or disconnecting
accessories.
1
Press the release button on attachment and pull
to separate.
2
Push the accessory into the reach wand until it
clicks into place.
CAUTION: To avoid injury, particularly
to face and head, keep hair, loose clothing,
fingers and all parts of the body away from
revolving brush.
Loading ...
Loading ...
Loading ...