Loading ...
Loading ...
Loading ...
10
TROUBLESHOOTING
Problem Solution
No picture
Make sure the cameras and monitor are plugged in.
Make sure the camera and monitor are in effective range.
Make sure the monitor is tuned to the correct input channel.
White image appears
at night
The camera’s infrared LEDs shine invisible light that reflects
off surfaces such as glass or mirror. Relocate or adjust
camera position.
Interference
Wireless cameras operate on the same 2.4GHz frequency
as many other electronics, such as routers, cordless phones
and microwaves. If possible, keep the cameras away from
these devices.
Camera shuts off
when switched from
battery to DC adapter
When DC adapter is connected, the camera auto shuts-off
to protect the batteries. Press the power button to turn
camera on again.
TECHNICAL INFORMATION
Transmission Frequency 2400MHz – 2480MHZ
Transmission Power 12dBm
Operating Frequency 2450 MHz
Effective Range (unobstructed) 250m
Modulation Mode FHSS
Operating Temperature 32°F to 140°F
Operating Humidity 20% - 80% RH
Consumption Current 150mA+15mA
GENERAL
Power Supply DC 5V
Pixel Image NTSC: 510x492; PAL: 628x582
Sensor Color CMOS Image Sensor
Horizontal Resolution 360 lines
Viewing Angle 60 degrees
Minimum Illumination 1.5LUX (IR off), 0 LUX (IR on)
Band Width 4MHz
Night Vision Distance 10 ft
Battery Working Time 8 hours
Motion Detection Distance >5m
Sound control Sensitivity >60dBA
Dimension 3.9(L) x 3.4(W) x 4.0(H) inches
Weight 6 oz (no batteries)
Frame 25
IR LEDs 10
CAMERA
Lens F = 6.0 mm
LCD Screen Type 2.4” TFT-LCD
Effective Pixels 320x240
Receiving Sensitivity -85dBm
Video System NTSC / PAL
Batter Working Time 5 hours
Color Configuration RGB
Dimension 2.8(W) x 2.0(D) x 4.7(H) inches
RECEIVER
Weight 4.5 oz
Loading ...