Tripp Lite S3M100K100KWR4T Owner's Manual

Loading ...

3. Installation and Wiring

3.8.3 Over-Current Protection

CAUTION!

• Wiring must be performed by qualied professional personnel.

• Before wiring or making any electrical connection, ensure the power supplied to the input and output of the UPS is cut

o completely and the internal battery connectors are disconnected.

• When connecting the UPS to the utility AC power and bypass source, protective devices and 3-pole connectors

must be installed. The protective devices and 3-pole contactors must use approved components that meet safety

certications. The thermo-magnetic circuit breakers should be IEC 60947-2 trip curve C (normal). Refer below for

required protective devices:

25kVA UPS: 100A input circuit breaker required.

30kVA UPS: 125A input circuit breaker required.

50kVA UPS: 200A input circuit breaker required

60kVA UPS: 250A input circuit breaker required

80kVA UPS: 320A input circuit breaker required

100kVA UPS: 400A input circuit breaker required

• When connecting the critical loads to the UPS, a listed certied breaker must be installed between them. Refer to the

below for the required breakers:

25kVA UPS: 100A input circuit breaker required.

30kVA UPS: 125A input circuit breaker required.

50kVA UPS: 200A input circuit breaker required

60kVA UPS: 250A input circuit breaker required

80kVA UPS: 320A input circuit breaker required

100kVA UPS: 400A input circuit breaker required

• Check that the size, diameter, phase and polarity of each cable connecting to the UPS is correct. For the specications

of input/output cables, refer to the table in section 3.10.1 Power Cables.

3.9 UPS to Battery Cabinet Model Compatibility

Battery Cabinets

with Batteries

BP240V09 /

09K BP240V40 BP240V40L BP240V65 BP240V65L BP240V100 BP240V100L

Battery Cabinets

with NO Batteries

BP240V09-

NIB

BP240V40-

NIB

BP240V40L-

NIB

BP240V65-

NIB

BP240V65L-

NIB

BP240V100-

NIB

BP240V100L-

NIB

S3M25K, S3M30K No Yes Yes Yes Yes Yes No

S3M50K No No Yes Yes Yes Yes Yes

S3M60K No No No No Yes Yes Yes

S3M80K, S3M100K No No No No Yes No Yes

Note: For battery cabinet breaker information, refer to the Owner’s Manual for your battery cabinet.

Loading ...

Tripp Lite S3M100K100KWR4T 3-Phase 208V UPS + Input/Output Isolation Transformer Kit - 480V to 208V/208V to 480V, 100kVA/kW, External Batteries Required

Owner's Manual - Page 23