Loading ...
Loading ...
Loading ...
29
Important information
Installation Instructions:
Additional information concerning gas
cookers:
몇 When installing gas hotplates, comply
with the relevant national statutory
regulations (e.g. in Germany: Technische
Regeln Gasinstallation TRGI).
몇 Always comply with the currently valid
regulations and installation instructions
supplied by the gas appliance
manufacturer.
몇 Only one side of the extractor hood
may be installed next to a high-sided unit
or high wall. Gap at least 50 mm.
몇 Minimum distance on gas hotplates
between the upper edge of the trivet
and lower edge of the extractor
hood: 650 mm, Fig. 1.
몇 Old appliances are not worthless
rubbish. Valuable raw materials can be
reclaimed by recycling old appliances.
Before disposing of your old appliance,
render it unusable.
몇 You received your new appliance in a
protective shipping carton. All packaging
materials are environmentally friendly and
recyclable. Please contribute to a better
environment by disposing of packaging
materials in an environmentally-friendly
manner.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
몇 The extractor hood can be used in
exhaust air or circulating air mode.
몇 Always mount the extractor hood over
the centre of the hob.
몇 Minimum distance between electric
hob and bottom edge of extractor hood:
550 mm, Fig. 1.
몇The extractor hood must not be
installed over a solid fuel cooker – a
potential fire hazard (e.g. flying sparks) –
unless the cooker features a closed,
non-removable cover and all national
regulations are observed.
몇 The smaller the gap between the
extractor hood and hotplates, the greater
the likelihood that droplets will form on the
underside of the extractor hood.
Prior to installation
Preparing the wall
❑ The wall must be flat and perpendicular.
❑ Make sure that the wall can bear the
applied loads.
❑ The provided screws and wall plugs are
suitable for solid masonry. On all other
wall types (e.g. plasterboard, porous
concrete, Poroton bricks) use the
appropriate fasteners.
❑ Ensure that the wall is capable of provi-
ding a firm hold for mounting screws
and plugs.
Weight in kg:
Exhaust air Recirculating air
25,0 26,5
We reserve the right to construction changes within the
context of technical development.
Loading ...
Loading ...
Loading ...