Loading ...
Loading ...
Loading ...
8
6.0 Operation
Never mix ferrous and non-
ferrous metal dust in the same dust
collector. Do not use this machine to collect
wood dust.
Connect a hose from the metalworking machine
to the port on the dust collector. Secure with a
hose clamp (not provided).
If you are connecting the dust collector to a
ductwork system, follow approved guidelines
and safety measures for the ducting, and
familiarize yourself with OSHA and NFPA
regulations.
Always install the caps over ports not being
used. This will promote more efficient suction, as
well as maintain safety in the workshop.
Press the green button to start; red to stop.
NOTE: Do not use this dust collector with
surface grinders.
10.0 User-maintenance
Turn off, disconnect (unplug)
the Dust Collector from the power source
before cleaning or servicing.
Perform the following on a regular basis. Exact
schedules are dependent upon frequency of
use.
Remove the filter from inside the door, and
clean it with a vacuum or soft brush.
Remove and empty collection bag.
Remove and empty debris drawer; it should
not be allowed to exceed 1/3 full.
Vacuum the fan area on the motor to
maintain proper ventilation.
NOTE: Do NOT use compressed air when
cleaning, as it may force debris into the motor or
other working parts of the machine.
10.2 Additional servicing
Any additional servicing should be performed by
authorized service personnel.
11.0 Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and
Serial Number of your machine available when you call will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from
JET. Some parts are shown for reference only, and may not be available individually.
Loading ...
Loading ...
Loading ...