Loading ...
Loading ...
Loading ...
S_CT_ON "_ WATER SOFTENER START-UP
I, _,, !
10. PROGRAM THE TIMER
2. SET WATER HARDNESS NUMBER:
[] Press the SELECT button once to display t5
(flashing) and HARDNESS
The grains per gallon (gpg)
hardness of your water' supply is
on your water analysis report, Be
sure to enter water test results on
page 2, for future reference,
d_w
HARONESS
NOTE:
If your water supply contains iron, compensate for
it by adding to the water hardness number, For
example, assume your water is 15 gpg hard and
contains .2 ppm iron, Add 5 to the hardness
number for each I ppm of iron In thLs e_cample,
you would use 25 for your hardness nzonber
15 gpg hardness
2 ppm iron x5 = 10 +10
(times) 25 HARDNESS NUMBER
[] Press the {_UP/DOWN []buttons to set your'
water hardness number in the display, The
DOWN button moves the display to 1, The UP
button moves the display to the highest setting
(see maximum setting for your' model in the
specifications)
NOTE:
Each press of the UP/DOWN button changes the
display by 1 between 1 and 25. Between 25 and
the highest number, the display changes 5 at a
time,.o25, 30, 35, etc. Continuous pressure on the
UP or DOWN button changes the display twice
each second.
3. SET RECHARGE (REGENERATION) TIME:
[] Press the SELECT button once to display 2:00
AM (flashing) and RECHARGE TIME
At the 2:00 AM RECHARGE TIME
setting, the softener begins re-
generation (see pages 11 and 12)
at 2:00 AM, ending no later than
4:00 AM, This is a good time in
most households because water
is not being used (see AUTO-
MATIC BYPASS, page 13)
RECHARGE TIME ]
If a different RECHARGE TIME setting would be
better for your household, do the following.
[] Press the [] UP/DOWN [] buttons to set the
desired RECHARGE starting hour. Be sure to
observe the AM-PM as you did when setting the
time of day.
NOTE:
Each press of the UP/DOWN buttons changes the
display 1 hour,. Continuous pressure on the UP or
DOWN button changes the display twice each
second.
[] Press the SELECT button once again, to
return the present time (steady) of day and
RECHARGE TONIGHT in the display
" {F2.,I
RECHARGE
IF YOU NEED HELP PROGRAMMING THE TIMER, CAH_, TOLL FREE, NUMBER 1-800- 426- 9345
SEE PAGE 10 FOR OTHER FACE PLATE TIMER FEATURES,
Loading ...
Loading ...
Loading ...