Blaze BLZ-SSRF130 Stainless Front Refrigerator 4.5 cu. ft

Blaze 4.5 Refrigerator Manual - Page 9

For BLZ-SSRF130.

PDF File Manual, 11 pages, Read Online | Download pdf file

BLZ-SSRF130 photo
Loading ...
Loading ...
Loading ...
9
CARE AND MAINTENANCE
CAUTION:
Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp
or metallic instrument to remove frost as it may damage the cooling system and will void the
warranty. We recommend using a plastic scraper.
Cleaning Your Unit
Turn the temperature control to "OFF", unplug the unit, and remove the contents, shelf, and tray.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be about
2 tablespoons of baking soda to a quart of water.
Wash the shelf and tray with a mild detergent solution.
The outside of the unit should be cleaned with mild detergent and warm water.
Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
CAUTION:
Failure to unplug the unit could result in electrical shock or personal injury.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
unit if you minimize the number of times the door is opened. If the power is going to be off for a longer
period of time, you need to take the proper steps to protect your contents.
Vacation Time
Short vacations: Leave the unit operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all content and unplug
the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the
door open slightly: blocking it open if necessary.
Moving Your Unit
Remove all contents.
Securely tape down all loose items inside your unit.
Turn the leveling legs up to the base to avoid damage.
Tape the door shut.
Be sure the unit stays secure in the upright position during transportation. Also protect the outside
of unit with a blanket, or similar item.
Energy Saving Tips
The unit should be located in the coolest area of the room, away from heat producing appliances,
and out of the direct sunlight.
Let hot items cool to room temperature before placing in the unit. Overloading the unit forces the
compressor to run longer.
Wipe containers dry before placing them in the unit. This cuts down on frost build-up inside the
unit.
Unit storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the unit less efficient.
Organize and label contents to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
Loading ...
Loading ...