Cafe CXE22DP2PS1 Café ENERGY STAR 22.3 Cu. Ft. Smart Counter-Depth 4-Door French-Door Refrigerator

Installation Instructions - Page 31

For CXE22DP2PS1.

PDF File Manual, 141 pages, Read Online | Download pdf file

CXE22DP2PS1 photo
Loading ...
Loading ...
Loading ...
30 49-1000329 Rev. 6
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
REMOVE LOWER HINGE
(if necessary) (on some models)
Remove screws that secure hinge to the cabinet.
,QQHUVFUHZVQHHGD´VRFNHW2XWHUVFUHZ
QHHGVD3KLOOLSV´
11
RE-INSTALL CONVERTIBLE
DRAWER (on some models)
To reassemble doors, reverse removal steps.
Convertible drawer basket will be loose if re-installed
EDFNZDUGV/RRNIRU³)5217´HPERVVWRKHOSZLWK
re-installation.
10
INSTALLATION INSTRUCTIONS
RE-INSTALL PIZZA TRAY AND
LOWER FREEZER BASKET (on
some models)
5HLQVWDOOORZHUIUHH]HUEDVNHWILUVWWKHQUHLQVWDOO
SL]]DGUDZHU
2. Check for smooth operation of baskets.
5HLQVWDOOIUHH]HUGUDZHUE\SODFLQJWKHGUDZHU
wheels onto the top of the track mounted to the
VLGHRIWKHIUHH]HUZDOOV7KHZKHHOVRQWKH
IUHH]HUGUDZHUVKRXOGEHRQWRSRIWKHERWWRP
basket sides.
13
12
REPLACE FREEZER DRAWER
(on some models)
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to secure
the door before lifting.
1. Pull the lower basket slide mechanism to full
extension with both hands.
/LIWWKHIUHH]HUGRRUDQGDOLJQWKHKRRNVZLWKWKH
notches on the slide mechanisms.
NOTE: Place one side in first, then align the other
side.
3. Replace the attachment screws and torque the
screws to 65 in-lb (7.34 N-m).
14
REINSTALL LOWER LEFT AND
RIGHT-HAND DOORS (on some models)
WARNING
Follow all steps for removing
and reinstalling the door. Failure to follow these
instructions, leaving off parts, or overtightening screws,
can lead to the door falling off and result in injury and
property damage.
CAUTION
Lifting Hazard
A single person lift could cause injury. Gain
assistance when handling, moving, or lifting
refrigerator doors.
1. Reinstall lower hinges first (if necessary) and torque
WKH´VFUHZVWRLQOE1PDQGVPDOO
screw to 25 in-lbs (2.82 N-m). Rotating the screw
by 1/3 turn after it is flush with mating surface will
achieve these torques.
2. With the door at 90° to the front of the case, lower
the refrigerator door onto the lower hinge, carefully
pulling the harness through the right-hand hinge.
Close the door and tape closed.
3. Reinstall the center hinge per step #1 above.
4. Remove the tape.
5. Open the lower right-hand door 90°.
6. Connect the two harnesses.
7. Replace both lower hinge covers (if necessary).
)UHH]HUGRRU
hook and slide
mechanism notch
Loading ...
Loading ...
Loading ...