Loading ...
Loading ...
Loading ...
22
Fault Finding
Fault Possible Cause Remedy
Element does not work when
turned ‘ON’.
Check individual fuses located
behind control panel.
Check for electrical short by
checking that there is NO
continuity between any 'Phase In'
line and metal appliance body
itself.
Check for item failing (element,
control etc) by using a multi-
meter as shown on following
pages.
Replace blown fuse.
Call service provider.
Complete power failure of the
appliance
Check fuse connection at mains
supply.
Ensure fuse size is correct to
carry the load.
Check for an electrical short to
appliance.
Replace blown fuse.
Carry out a continuity and
resistance check on appliance.
Call service provider.
NOTE: Components having adjustments protected (e.g. paint sealed) by the manufacturer, are only
to be adjusted by an authorised service agent. They are not to be adjusted by an
unqualified service person.
Loading ...
Loading ...
Loading ...