Loading ...
Loading ...
Loading ...
12 English
1. Press to power unit ON or OFF.
2. Select desired speed setting by pressing or button.
3. Press
to change from direct airow to exhaust. Press the
button again to change from exhaust to direct airow.
4.
Press to activate AUTO MODE. The icon will turn green to
indicate AUTO MODE is activated.
• Press or button to set your ideal temperature, holding
either button for 3 seconds will allow for quick temperature
adjustment up or down by 5 degrees per second.
• While in this adjustment mode, the temperature display will
momentarily ash and then return to display the current indoor
room temperature.
• A single press of the button, when AUTO MODE is activated,
will change display from room temp back to SET TEMP ashing if
adjustments are needed.
• Press the button twice to deactivate AUTO MODE. The icon
will turn white to indicate AUTO MODE is deactivated.
Note: The remote requires a line-of-sight path to allow for the signal
to be received by the product. Position the product so the receiver
lens (located near near the control panel) is visible from the remote
control.
REMOTE CONTROL
REMOTE FUNCTIONS
Loading ...
Loading ...
Loading ...