Loading ...
Loading ...
Loading ...
— 13 —
Installation
STEP 8
Venting
• Fix the damper on the top vent of hood (see Figure #3).
• Let the ducting pipe go inside through the hole from the ceiling (see Figure #4).
• Measure the length of 6 in. round metal duct required from the damper / duct connector to the ductwork rough-in in the
ceiling. Connect the duct to the duct connector and seal with duct tape.
STEP 9
Electrical
• Remove the protective coating from the upper chimney. Carefully slide the upper chimney down into the lower chimney.
Slide the chimneys over the angle brackets.
• Feed the electrical wires up through the chimneys (see Figure #5).
Figure #4
Figure #5
Figure #3
Electrical
wires
Loading ...
Loading ...
Loading ...