Loading ...
Loading ...
Loading ...
3
ASSEMBLING
Step 1 :Make sure four hole of front and back base in straight alignment,
Put hole of back base insert to cylinder of front base.
Step 2 : Take out the power cord from the central of base
Step 3 : Assembled base of central have four pieces of screw hole
which fix into the screw holes of body ,use 4 pieces of tapping screw, fix
closely the body and base. Finally take the power cord into the line hole.
Step 4 : Put the fan flatly
CAUTION
1. Use as per the rating voltage.
2. Do not repair or remake the appliance by yourself, it should be repaired by the
repairmen.
3. Do not operate the appliance with wet hands, in order to avoid damage.
4. If the supply cord is damaged, it must be replaced by a same cord from the
manufacturer or its service agents.
5. When the appliance is not in use, switch it off and unplug it.
6. Do not insert things to air outlets and inlets, in order to avoid damage.
7. Do not use the appliance near explosive and combustible gas.
8. Use the appliance only on a flat surface.
9. Do not use outdoors.
10. .Do no turnover the appliance. Unplug the power supply If it is toppled over and there
have some water in the body. Dry the body before use.
13.Clean the appearance with a lightly damp cloth.It can clean with neutral detergents. Do
not rinse with water.
14.Do not make air outlets and inlets near the wall or curtain.
Loading ...