JBLBAR1000PROBLKAM Owner's Manual

Loading ...

2424

11. RE-CONNECT THE SUBWOOFER

The soundbar and subwoofer are paired at factories. After

power-on, they are paired and connected automatically. In some

special cases, you may need to pair them again.

SUB PAIRING

To re-enter the subwoofer pairing mode

1. On the rear panel of subwoofer, press and hold until it

turns fast ashing white.

2. To enter the subwoofer pairing mode on the soundbar, press

and hold on the remote control for more than three

seconds. Then, press on the remote control.

J “SUB PAIRING”: The subwoofer is ready for pairing.

J “SUB PAIRED”: The subwoofer is connected.

NOTES:

− The subwoofer will exit the pairing mode in three minutes and go to

standby, if pairing is not completed. turns from fast flashing white

to off. To return to the pairing mode, press .

12. PRODUCT SPECIFICATIONS

General specication:

• Model: BAR 1000 (soundbar unit)

BAR 1000 SURROUND (detachable speaker)

BAR 1000 SUB (subwoofer unit)

• Sound system: 7.1.4 channel

• Power supply: 100 - 240V AC, ~ 50/60Hz

• Total speaker power output (Max @THD 1%): 880W

• Soundbar output power (Max @THD 1%): 440W

• Surround speaker output power(Max @THD 1%): 2x 70W

• Subwoofer output power (Max. @THD 1%): 300 W

• Soundbar transducer: 5x (46x90)mm racetrack drivers,

3x 0.75” (20mm) tweeters, 2x 2.75” (70mm) up-ring full-

range drivers

• Surround speaker transducer: 0.75” (20mm) tweeter,

2.75” (70mm) up-ring full-range driver

• Subwoofer transducer: 10” (260mm)

• Networked standby power: < 2.0 W

• Operating temperature: 0°C - 45°C

• Lithium battery: 3.635V, 3283mAh

• Detachable surround speaker playtime: up to 10 Hours

(may vary according to content type and volume level)

HDMI specication:

• HDMI video input: 3

• HDMI video output (with Enhanced Audio Return Channel,

eARC): 1

• HDMI HDCP version: 2.3

• HDR pass through: HDR10, Dolby Vision

Audio specication:

• Frequency response: 33Hz - 20kHz (-6dB)

• Audio inputs: 1 Optical, Bluetooth, USB (USB playback is

available in US version. For other versions, USB is for Service

only.)

USB specication:

• USB port: Type A

• USB rating: 5V DC, 0.5A

• Supporting le formats: mp3

• MP3 codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG

2.5 Layer 3

• MP3 sampling rate: 16 - 48 kHz

• MP3 bitrate: 80 - 320 kpbs

Wireless specication:

• Bluetooth version: 5.0

• Bluetooth prole: A2DP 1.2, AVRCP 1.5

• Bluetooth transmitter frequency range:

2400 MHz – 2483.5 MHz

• Bluetooth transmitter power: <15 dBm (EIRP)

• Wi-Fi network: IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)

• 2.4G Wi-Fi transmitter frequency range: 2412 - 2472 MHz

(2.4 GHz ISM Band, USA 11 Channels, Europe and others

13 Channels)

• 2.4G Wi-Fi transmitter power: <20 dBm (EIRP)

Loading ...

Owner's Manual - Page 24