Loading ...
Loading ...
Loading ...
CLEANING & USE GUIDANCE
1. Clean the inner liner, ice collecting tray, water box, ice shovel
and evaporator frequently. When cleaning, unplug the unit and
remove the ice cubes. Use a diluted solution of water and
vinegar to clean the inside and the outside surface of the ice
maker. Do not spray Ice maker with chemicals or diluted agents
such as acids, gasoline or oil. Rinse thoroughly before starting.
2. Keep ventilation openings in the appliance enclosure, or in the
built-in structure, clear of obstruction. Do not use mechanical
devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
3. Reuse the machine after being idled for a period of time, it may
not have enough water to pump for air retard, in this case, the
water shortage indicator “ADD WATER” will light up, just
repress POWER button to restart the ice maker.
4. To ensure the cleanness of ice, please change water for water
reservoir at least once one day. If do not use for a long time,
please drain the water out and clean it up.
5. If the compressor takes a strike action for shortage water, fully
water or interruption of power supply, it will delay for 3minutes to
start up after restarted.
6. Always use fresh water before starting ice production either at
initial installation or after a long shut-off period.
7. According to the actual use of the machine, the filter screen in
the water tank shall be regularly cleaned after disassembly to
prevent the water inlet from being blocked by scale. As shown in
the figure below. Take out the ice basket and filter cover from
the water tank in turn, clean the filter cover with clean water with
a brush, and then put them back in place.
9
Loading ...
Loading ...
Loading ...