Loading ...
Loading ...
Loading ...
Setting the Countdown Start
Time
The start time can be set in 1-second units up
to 60 minutes.
●
If a timer countdown operation is in
progress, reset the timer to its current start
time before performing this operation.
l
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the minutes
setting starts to flash.
●
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Minutes
3. Use (B) and (D) to change the minutes
setting.
●
Holding down (B) or (D) scrolls through
settings at high speed.
4. Press (C).
This causes the seconds digits to flash.
Seconds
5. Use (B) and (D) to change the seconds
setting.
6. Press (A) to exit the setting screen.
Note
●
Setting a start time of [00’00] will
perform a countdown of 60 minutes.
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
Minutes, seconds
2. Use the operations below to perform a
timer operation.
D
D
D
(Time up)
Resume
Pause
(Countdown starts)
Start
●
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
●
You can reset a paused countdown to
its start time, by pressing (A).
3. Press any button to stop the tone.
Timer Countdown Indication
30 minutes before the end of a timer operation
is reached, a countdown start tone sounds
and the function hand starts to indicate the
remaining time until the end of the timer
operation.
●
The countdown start tone will not sound
when the timer start time is 30 minutes or
less.
Function hand
Note
●
You can use the procedure below to
enable or disable the countdown start
tone.
l
Disabling the Countdown Start
Tone
●
During a period within 30 minutes of
both an alarm time and the end of a
timer operation, the function hand
indicates the timer countdown.
Watch Operation Guide 5710
23
Loading ...
Loading ...
Loading ...