Sun Joe 24V-PWSCRB-LTW 24-Volt IONMAX Cordless Heavy-Duty Indoor/Outdoor

OPERATOR’S MANUAL - Page 7

For 24V-PWSCRB-LTW.

PDF File Manual, 48 pages, Read Online | Download pdf file

24V-PWSCRB-LTW photo
Loading ...
Loading ...
Loading ...
7
Unpacking
Carton Contents
Cordless power scrubber head (pre-assembled)
Scrubber handle (pre-assembled)
Pole attachment
Large at brush (pre-assembled)
Small at brush
Cone brush
Round brush
24V iON+ lithium-ion battery
24V iON+ lithium-ion charger
Manual with registration card
1. Carefully remove the power scrubber and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
power scrubber. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
mWARNING! Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
All 3 level monitoring LEDs are lit: Battery charge level
is high.
2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, insert the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
Charger Operation
mWARNING! Charge only 24V iON+ lithium-ion battery
packs with its compatible 24V iON+ lithium-ion charger.
Other types of batteries may cause personal injury and
damage. To reduce the risk of electric shock, do not allow
water to ow into the charger's AC/DC plug.
When to Charge the 24V iON+BAT-LTW
Lithium-iON Battery
NOTE: The 24V iON+BAT-LTW lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before inserting the charger plug.
Use the battery indicator lights to determine when to charge
your 24V iON+BAT-LTW lithium-ion battery pack.
You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Battery
1. Push the push lock buttons on the battery to pull the
battery out from the battery compartment (Fig. 1).
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Battery
Fig. 1
Battery
compartment
Push lock button
Loading ...
Loading ...
Loading ...