Loading ...
Loading ...
Loading ...
PROGRAMMING THE THERMOSTAT
5
Temporary and Permanent Hold FeatureFilter Change Reminder
If your installing contractor has configured
the thermostat to remind you when the air
filter needs changed, you will see FILT in the
display when your air filter needs changed.
FILT will be shown in the display after your
system has run long enough to require an air
filter change.
Resetting the filter change reminder: When
FILT reminder is displayed, you should
change your air filter and reset the reminder
by holding down the second button from the
top left side of the thermostat for 3 seconds.
Temporary hold: The thermostat will display
HOLD and RUN SCHED on the left of your
screen when you press the
or key.
If you do nothing, the temperature will remain
at this setpoint temporarily until the next
program period begins. Your program
setpoint will then replace your temporary
setpoint.
Permanent hold: If you press HOLD, you will
see HOLD appear below the setpoint tem-
perature in the display. The thermostat will
now permanently stay at this setpoint and can
be adjusted using the
or keys.
To return to program: Press RUN SCHED to
exit either temporary or permanent hold.
Hold down for 3 seconds,
to reset filter reminder.
Loading ...