Loading ...
Loading ...
Loading ...
®
E-4
1. Plug into a 120V electrical outlet based on the voltage indicated on the rating label.
2. Select a firm, level flat location – at least six inches (15 cm) from
any wall or object for proper air flow. Point air outlet away from wall.
3. Turn “on” by turning control knob to preferred fan speed.
0 - Off
1 - Low Speed
2 – Medium Speed
3 – High speed
4. Press “Oscillation button” to make the
tower fan oscillate back and forth.
DIRECTIONS FOR USE
E-5
PRODUCT SPECIFICATIONS AND PARTS
Power Plug
Control Panel
Air Outlet
Air Intake
Base
4 pack of screws
included for base
assembly
ASSEMBLY
1. Carefully unpack your tower fan and the set of 4 screws. Remove all plastic bags.
Remove shipping tape strips from the sides of the fan.
2. Gently turn the fan upside down. Place the front base piece on the bottom of the unit.
3. Place the power cord through the
notch on the back base piece.
4. Connect the back
piece to the front
piece by aligning
the notches.
6. Secure base
to the fan with
the 4 provided
screws.
Power and fan
speed control
Oscillation Button
1. Turn the tower fan off and unplug it before cleaning.
2. The outside of the tower fan can be cleaned with a soft, clean dampened cloth.
3. The air inlet and outlet can be cleaned of dust with a small, soft brush.
4. Do not allow moisture to come in contact with the main body of the tower fan.
Ensure that the fan is switched off from the supply mains before removing the guard.
CLEANING AND MAINTENANCE
END OF SEASON STORAGE
Follow the cleaning instructions if the fan will be stored at the end of the season.
Pack the unit in its original carton and store in a cool, dry location.
TROUBLE SHOOTING GUIDE
Unit won’t operate.
Check to make sure the unit is plugged in.
Check to make sure the unit is on.
Check the fuse in the power cord (page 3).
Check to make sure the outlet is working properly.
Check that the base is correctly assembled.
PROBLEM
SOLUTION
Decreased air flow.
Check to make sure nothing is blocking the air inlet or outlet.
Be sure the plastic bag has been removed from the unit.
O
3
2
1
5. Put the power
cord through
the cord guides.
Loading ...
Loading ...
Loading ...