Loading ...
Loading ...
Loading ...
8
Read all instructions and safety information carefully before first use. Please retain
this information for future reference.
1. Remove the product from the box.
2. Remove any packaging from the product.
3. Please retain all packaging until you have checked and counted all the parts
and the contents against the parts list.
4. Dispose of the packaging in a responsible manner.
4 - Before First Use
Assembling the Unit:
1. To use the unit, begin by assembling it.
2. To assemble the window vacuum, clip the squeegee onto the main body of
the unit. To do this, align the 2 tabs at the back of the squeegee with the 2
corresponding slots on the main body of the unit.
3. Once the parts are lined up, push down on the grooved tab at the underside of
the squeegee and push the attachment onto the main body of the unit until
both tabs click into place.
4. The window vacuum is now ready for normal use.
Charging the Unit:
1. This unit can be charged from the mains, using the included mains adaptor.
2. To charge the unit, insert the mains adaptor into its corresponding jack at the
back of the unit and plug it into an active mains socket, ensuring the socket
switch is turned to the ON position. The LED indicator above the charging port
will flash blue to indicate the unit is charging.
Note: The normal charging time for this unit is of approximately 3 hours.
3. The unit will be fully charged when the LED indicator changes from flashing
blue to solid blue. This indicates the window vacuum is ready for normal use.
4. When the unit’s battery is running low, the LED indicator will begin to flash
blue. This indicates the battery has reached 5% capacity. When the battery is
fully flat, the indicator will flash quicker and the motor will stop running. When
this occurs, charge up the unit as detailed above.
Note: A rapidly flashing blue indicator and stopped motor when the unit is fully
charged may also indicate the unit’s automatic safety cut-off system has activated.
Should this occur, check that the vents are not being blocked and that the water
reservoir is firmly secured to the unit before attempting to use the unit again.
Using the Window Vacuum:
1. Once the window vacuum has been assembled, press the On/Off button to
turn it on. The motor will start up and the LED indicator light on the lower part
of the unit will light up blue to indicate the unit has been turned on.
2. Press the On/Off button again while the unit is in operation to turn it off. The
motor will stop working and the LED indicator light on the lower part of the
unit will go out to indicate the unit has been turned off.
3. To use the vacuum cleaner, turn it on and run it over the area to be cleaned
in a straight line, from top to bottom or from side to side. The vacuum will
automatically absorb any water or moisture contained within that area and
store it in the water tank. Repeat this process as many times as necessary until
the relevant area has been fully cleaned.
5 - Using Your Appliance
Loading ...
Loading ...
Loading ...