Asko YY200 L Air Purifier Replacement Filter

Product's Documents

Below are documents related to this product, you can read online or download:

Filter Installation

This is the main product document for model YY200. Additionally, the document applies to other Asko models: LP200, LP300, LP450

The file format is pdf, 2 pages, you can download this manual here .

background
NEW 7/20 1 YY200_YY350QSG_ES
Filter Installation (Applies to LP200, LP300, and LP450)
2. Filters must be installed in the following order:
First - True HEPA Filter
Second - Activated Carbon Filter
True HEPA
Activated
Carbon
1. Press the EZclick
™
Filter button to release the
cover for the filter compartment.
EZclick
™
Filter Button
3. Replace the Filter Door by pressing the EZclick
™
Filter button to the top of the unit.
*Note: The unit will not operate unless the rear cover is properly installed.
TYPE OF AIR PURIFICATION:
INCLUDED
IN PACKAGE
LIFE
TRUE HEPA FILTER*
Removes 99% of particles 0.3 microns and larger
1 12 Months/2800 hours
Activated Carbon Odor Filter 3 4 Months/960 hours
Filter Replacement Reminders
When the LED above the power button blinks RED it is time to replace the Acti-
vated Carbon Filter, the True HEPA Filter, or both. To reset the Filter Replacement
Reminder press the Power and Timer button together for 3 seconds. The LED
should blink 3 times and turn off. The unit run timer has now been reset.
background
NEW 7/20 2 YY200_YY350QSG_ES
Recordatorios de reemplazo del filtro
cuando el LED sobre el botón de encendido parpadea en ROJO, es hora de re-
emplazar el filtro de carbón activado, el filtro HEPA verdadero o ambos. Para
restablecer el recordatorio de reemplazo del filtro, presione el botón de encendido
y el temporizador juntos durante 3 segundos. El LED debe parpadear 3 veces y
apagarse. El temporizador de funcionamiento de la unidad ahora se ha restablecido.
Instalación del Filtro (Se aplica a LP200, LP300 y LP450)
2. Los filtros deben instalarse en el siguiente orden:
Primero: Verdadero Filtro HEPA
Segundo: Filtro de Carbón Activado
Verdadero
HEPA
Carbón
Activado
1. Presione el Botón del Filtro EZclick
™
para
liberar la tapa del compartimento del filtro.
Botón de ltro EZclick
™
3. Vuelva a colocar la puerta del filtro colocando la mano en un pequeño hueco del panel
y empujando hacia la unidad.
*Nota: La unidad no funcionará sin la cubierta trasera instalada correctamente.
TIPO DE PURIFICACIÓN DEL AIRE:
INCLUIDO EN
EL PAQUETE
VIDA ÚTIL
VERDADERO FILTRO HEPA*
Elimina el 99% de las partículas de 0.3 micrones y
más grandes
1 12 meses/2800 horas
Filtro de carbón activado para olores 3 4 meses/960 horas

Specifications

Asko YY200 Questions and Answers

Questions and Answers

Related Products