Loading ...
Loading ...
Loading ...
en Sensors
30
■ Selecting a spin speed or setting the
programme selector to Drain/Empty
and then pressing the Start Reload
A button.
Programme end
“Ÿš appears in the display panel and
the indicator lamp of the Start Reload
A button goes out.
Removing laundry/switching
off the appliance
1. Turn the programme selector to the
off position. The appliance is
switched off.
2. Open the door and remove the
laundry.
3. Turn off the tap.
Note: Not required for Aqua-Stop
models.
Notes
■ Always wait until the programme
ends, as the appliance could still be
locked.
■ At the end of the programme, the
appliance switches to energy saving
mode. The lighting goes out and the
Start Reload A button flashes.
Press any button to activate the
panel.
■ Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■ Wipe the rubber seal and the
washing machine door dry.
■ Leave the door and detergent
drawer open so that any residual
water can evaporate.
H Sensors
Sensors
Automatic load sensing
The automatic load-sensing function
perfectly adapts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping the drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note: Place large and small items of
laundry evenly in the drum.
~ "Faults and what to do about them"
on page 34
Loading ...
Loading ...
Loading ...