Loading ...
Loading ...
Loading ...
WARNING: When using the tool, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep the work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools
in damp or wet locations. Don’t expose to rain. Keep the work area
well-lighted. Do not use electrically powered tools in the presence of
flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area.
Do not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep them out of reach of
children.
5. Do not force the tool. It will do the job better and more safely at the rate
for which it was intended. Do not use inappropriate attachments in an
attempt to exceed the tool's capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. Do not modify this tool, and
do not use this tool for a purpose for which it was not intended.
7. Dress properly. Do not wear loose clothing or jewelry, as they can be
caught in moving parts. Protective, electrically non-conductive clothes, and
non-skid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
8. Use eye and ear protection. Always wear ANSI-approved impact safety
goggles. Wear a full face shield if you are producing metal filings or wood
chips. Wear an ANSI-approved dust mask or respirator when working
around metal, wood, and chemical dust and mists.
9. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
10. Maintain tools with care. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubricating and changing
Loading ...
Loading ...
Loading ...