Loading ...
Loading ...
Loading ...
DJI Mini 3
User Manual
44
©
2022 DJI All Rights Reserved.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the remote
controller is positioned towards the aircraft as depicted below.
Optimal Transmission Zone
Weak Signal
Linking the Remote Controller
The remote controller is already linked to the aircraft when purchased together as a combo.
Otherwise, follow the steps below to link the remote controller and the aircraft after activation.
1. Power on the aircraft and the remote controller.
2. Launch DJI Fly.
3. In camera view, tap
and select Control and then Pair to Aircraft (Link).
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft will
beep once when it is ready to link. After the linking is successful, the aircraft will beep twice
and the battery level LEDs of the remote controller will appear on and solid.
•
Make sure the remote controller is within 0.5 m of the aircraft during the linking.
•
The remote controller will automatically unlink from an aircraft if a new remote
controller is linked to the same aircraft.
•
Turn off Bluetooth and Wi-Fi of the mobile device for optimal video transmission.
•
Fully charge the remote controller before each flight. The remote controller sounds an
alert when the battery level is low.
•
If the remote controller is powered on and not in use for five minutes, an alert will
sound. After six minutes, the remote controller automatically powers off. Move the
control sticks or press any button to cancel the alert.
•
Adjust the mobile device holder to make sure your mobile device is secure.
•
Fully charge the battery at least once every three months to maintain the battery’s health.
Loading ...
Loading ...
Loading ...