Husqvarna 540I XP WITHOUT BATTERY AND CHARGER Operator's Manual

Loading ...

3. Put the battery in the battery holder.

CAUTION: Make sure that the

battery is installed correctly into the

battery holder. If the battery does not

move easily into the battery holder, the

position is not correct.

4. Push on the lower part of the battery until you hear a

click sound.

5. Push and hold the start/stop button until the green

LED light comes on.

To use the SavE function

The SavE function decreases the chain speed and the

power of the product.

1. Push the SavE button. The green LED comes on.

2. Push the SavE button again to disconnect the

function. The green LED goes off.

To stop the product

1. Push and hold the start/stop button until the green

LED light goes off.

2. Push the battery release buttons and remove the

battery from the battery holder to prevent accidental

start.

Pull stroke and push stroke

You can cut through wood with the product in 2 different

positions.

• To cut on the pull stroke is when you cut with the

bottom of the guide bar. The saw chain pulls through

the tree when you cut. In this position you have

better control of the product and the position of the

kickback zone.

1065 - 007 - 27.09.2021

Loading ...

Husqvarna 540I XP WITHOUT BATTERY AND CHARGER Chainsaw