Loading ...
Loading ...
Loading ...
10
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Restrictions when using
As two independent hotplates: (model 1) if you want to activate
this function for hotplate 1, hotplate 2 must be turned off, and
vice versa. If not turned off, the letter
› and power level Š will
flash alternately on the hotplate display and the power level
Š
will be reset without activating the function.
As one single hotplate: (model 2) the Powerboost function can
be activated on the entire hotplate. In this case, place the pan
at the centre of the flexible zone as shown in the Flexible zone
section.
How to activate
1. Select power level 9.
2. Press the boost G symbol.
The
› indicator lights up.
The function will have been activated.
How to deactivate
Select a power level other than 9. The indicator › will no longer
be displayed.
The Powerboost function will have been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time program function
This function allows you to turn off a hotplate automatically.
Turning off a hotplate automatically
Enter the cooking time for the hotplate. The hotplate turns off
automatically once the time has elapsed.
How to program
1. Select the desired hotplate and power level.
2. Press the r symbol. The indicators min and r light up
and
‹‹ lights up on the time program function indicators.
3. In the next 10 seconds, program the required time using
symbols 1 to 9.
The indicator
r turns off. The cooking time starts to count
down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Press the
r symbol. The r indicator lights up.
Change the cooking time using symbols 1 to 9 or press 0 to
cancel the time.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A beep is
heard and
‹ appears on the hotplate and the time
programming function display shows
‹‹ for 10 seconds.
When the
r symbol is pressed, the displays turn off and the
beep goes off.
Notes
■ If a cooking time has been programmed, the display always
shows the time for this function. To view the remaining
cooking time for a hotplate, select the corresponding
hotplate.
■ If a time has been programmed for several hotplates, the
time of the selected hotplate is always shown.
■ Cooking times can be programmed for up to 99 minutes.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
”, ‰ symbol and the residual
heat indicator
œ/• flash alternately in the display.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
0
RGH
O
0RGHO
Loading ...
Loading ...
Loading ...