Thor Kitchen Gas Rangetop
PROFESSIONAL GAS RANGETOPS
USER MANUAL & INSTALLATION GUIDE
Models
HRT3003U
HRT3618U
HRT4806U
Thor Kitchen Gas Rangetop
1
Welcome & Congratulations
Congratulations on your purchase of a Thor Kitchen rangetop!
We are very proud of our products and are completely committed to provide you with the best
cooking
experience. Your satisfaction is our top priority.
Please read through this manual prior to installation, it contains important information to help you
properly use
& maintain your new gas rangetop.
IMPORTANT NOTE:
Inspect the product and packaging to verify no shipping damage to the product.
DO NOT return this product to the original seller.
Please reach us for help (+1 877-288-8099, or email [email protected]) , and we will do our
best to help you.
Questions?
+1 877-288-8099 service@thorgroup
www.thorkitchen.com
13831 Oaks Ave.
Chino, CA 91710
We look forward to hearing from you!
Thor Kitchen Gas Rangetop
2
Gas Rangetop Installation
IMPORTANT NOTE: This installation
must be completed by a qualified
appliance installer, service company or
gas supplier.
Read this entire installation manual
carefully prior to installation and save for
the local inspector’s reference. Keep this
installation manual for future reference.
If you have any question, please contact
our service department immediately for
assistance.
The appliance must be installed in
accordance with National Electrical Codes,
as well as all state, municipal and local
codes. The correct voltage, frequency and
amperage must be supplied to the
appliance from a dedicated, grounded
circuit breaker or time delay fuse.
Thor Kitchen gas rangetop are manufacture
for use with natural gas or liquid propane
gas (LP).
Features and specifications are subject to
change at any time without notice. Visit
thorkitchen.com for the most up-to-date
information or call us at 877-288-8099
during regular office hour: 9am – 5pm
(M-F / PST)
To ensure the safe use of Thor Kitchen
equipment, please take note of the
following types of highlighted
information throughout this guide.
• IMPORTANT NOTE Important
information that needs your attention.
• CAUTION indicate a situation where
minor injury or product damage may
occur if instructions are not followed.
• WARNING states a hazard that may
cause serious injury or death if
precautions are not followed.
Thor Kitchen Gas Rangetop
3
WHAT TO DO IF YOU SMELL GAS:
• DO NOT try to light any appliance.
IMPORTANT INSTRUCTIONS
• Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
• Warranty service must be performed
by a Thor Kitchen authorized service
partner.
• Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
• A ventilation hood is recommended for
use with the Thor Kitchen gas rangetop.
• In Massachusetts: Installations and
repairs must be performed by a
qualified or licensed contractor,
plumber or gasfitter qualified or
licensed by the state, province, or
region where this appliance is being
installed. Only use gas shut-off valves
approved for use within the state,
province, or region where this appliance
is being installed. A flexible gas
connector, when used, must not exceed
3' (.9 m).
• DO NOT touch any electrical switch.
• DO NOT use any phone in your building.
• Call your gas supplier Immediately
from a neighbor’s phone. Follow any
instructions from the gas supplier for
your own safety.
• Call your local fire department if you
cannot reach your gas supplier.
Thor Kitchen Gas Rangetop
4
WARNINGS:
Children should not play with packaging material
Dispose the carton and plastic bags after the range top is unpacked. Cartons covered
with rugs, bedspreads, or plastic sheets can become air-tight chambers.
Remove all staples from the carton
Staples can cause severe cuts and destroy finishes if they come in contact with other
appliances or furniture.
Carefully read and follow all instructions prior using your new rangetop
Be safety conscious. The preparation of food on a range top requires temperatures that
could cause severe burns.
Proposition 65
The California Safe Drinking Water and Toxic Enforcement Act of
1986 (Proposition 65) requires the Governor of California to publish a list of substances
known to the State of California to cause cancer or reproductive harm.
.
Burning of gas can result in exposing low level of listed substances, including formaldehyde,
benzene, soot and carbon monoxide. This is caused primarily from the incomplete
combustion of natural gas or LP gas. Properly adjusted burners will minimize incomplete
combustion.
By opening a window, using a ventilating hood or fan can minimized the exposure to these
substances.
Proper installation
Thor kitchen gas rangetop must be properly installed and grounded by a qualified
technician in accordance with the National Fuel Gas Code ANSI Z223.1-latest edition, and
the National Electrical Code ANSI/NFPA No.70-latest edition.
Installation & safety
Ask your dealer to recommend a qualified technician and an authorized repair service.
Have the technician familiarize you with the locations of the manual gas shut off valve and
gas meter in the event it is necessary to shut off gas supply to the range top during an
emergency.
DO NOT REPAIR OR REPLACE any part of the appliance unless specifically recommended by
owner’s manual or customer service department.
Repair service should be done by Thor kitchen authorized technician/service partner only.
This will reduce the risk of personal injury and damage to the product.
Thor Kitchen Gas Rangetop
5
WARNING!
• DO NOT store any flammable materials near surface burners. The type of materials
includes paper, plastic and flammable liquids.
• Do not store explosives, such as aerosol cans, on or near the range top
• Failed to follow this owner’s manual could lead to serious injury or damage to the product
WARNING!
DO NOT TOUCH SURFACE BURNERS OR AREAS NEAR THESE BURNERS
Surface burners may be hot after use, even though the flame is not visible or contact the
surface directly. Areas near surface burners may become hot enough to cause burns
during and after use.
Do not let clothing or other flammable materials to contact with areas near surface burners
until they have had sufficient time to cool down.
WARNING!
NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning.
Thor Kitchen Gas Rangetop
6
Installation Instructions
Be sure the range top is properly installed and grounded by a qualified technician. It is the
responsibility of the technician to make certain that your range top is properly installed.
Situations cause by improper installation are not covered under the warranty. Any expenses
incurred due to such situations will not be paid by the manufacturer of the range top.
Leak testing of the appliance shall be conducted according to the manufacturer’s
instructions, or according to local building codes and gas regulations in your area.
GAS CONNECTIONS (All Units)
NOTICE TO MASSACHUSETTS APPLIANCE DEALERS:
Be sure this document is included in all gas range top appliances sold to consumers in the
State of Massachusetts.
NOTICE:
Massachusetts law requires the following:
• Appliances must be installed by a licensed plumber or gas fitter.
• Appliances must be connected with a three (3) foot (36” maximum length) flexible gas
connector and
• A “T” handle type manual gas valve in the gas supply line to the appliance.
Have the dealer where you purchase your new range top install it or have them recommend a
qualified installer. Installation must conform with local codes. In the absence of local codes, the
installation must conform with the National Fuel Gas Code, ANSI Z223.1-Latest Edition in the
U.S.A. or the CAN/CGA B149.1 or .2
Installation Codes in Canada.
The range top should be connected to the supply line with 1/2-inch black iron pipe or a
certified flexible type stove connector. To prevent gas leaks, put an approved sealing
compound which is resistant to liquefied petroleum gases on all threaded connections.
Important: Do not apply pressure directly to the range top manifold pipe when tightening
supply connections. The manifold pipe should be held securely at the pressure regulator to
prevent twisting. Hold the pressure regulator with a wrench during the tightening of the
connection, or the manifold pipe may be twisted and split and cause a dangerous leak.
The installation of range tops designed for manufactured (mobile) home installation must
conform with the Manufactured Construction and Safety, Title 24 CFR, Part
3280, [formerly the Federal standard for Mobile Home Construction and Safety, Title 24,
HUD (Part 280)] in the U.S.A. or C.S.A. Standard CAN/CGA Z240.4.2 in
Canada or, when such standards are not applicable, with local codes.
Thor Kitchen Gas Rangetop
8
The installation of range tops designed for recreational vehicle installation must conform with
state or other codes or, in the absence of such codes, with the
standard for recreational vehicles. ANSI A119.2.2–1982 in the U.S.A. or
CAN/CGA Z240.4.2 in Canada.
The installation of appliances designed for recreational park trailers must conform with state
or other codes or, in the absence of such codes, with the standard for recreational park
trailers, ANSI A119.5.
Note: Check all piping connections in the unit for leaks. Never use an open flame to check for
gas leaks. Use a soap solution, 75% water, 25% dish washing soap. It is possible for connections
made at the factory to leak, due to vibration encountered in transportation. Make certain you
have checked them all and repair any connections that leak.
The appliance and its individual shut-off valve must be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in excess of 1/2 psig.
The appliance must be isolated from the gas supply piping system by closing its individual
manual shut- off valve during any pressure testing of the gas supply piping system at test
pressures equal to or less than 1/2 psig.
GAS LINE SHUT-OFF VALVE
• To reduce the possibility of gas leaks, apply Teflon tape or a thread compound approved
for use with LP or Natural gases to all threaded connections.
• Install a manual gas line shut-off valve in the gas line in an easily accessed location outside
the range in the gas piping external to the appliance for the purpose of turning on or
shutting off gas to the appliance.
• Install male 1/2’’(30 or 36 inch rangetop) or 3/4” (48 inch range top) flare union adapter to
1/2” or 3/4’’ NPT internal thread elbow at inlet of regulator. Use a wrench on the regulator
fitting to avoid damage.
• Install male 1/2” or 3/4” flare union adapter to the NPT internal thread of the manual shut-
off valve, taking care to secure the shut-off valve to keep it from turning.
• Check for leaks using a leak detector or soapy water, 75% water, 25% dish washing soap.
INSTALLATION / CLEARANCES
All units must be installed in accordance to minimum rear and side wall clearances and
clearances extended vertically above cooking top which are stated on the serial plate (the
serial plate is located on the back of the unit.)
Make sure that the wall coverings, counter tops and cabinets around the range top can
withstand temperatures of up to 200 ˚F/93 ˚C generated by the range top.
Thor Kitchen Gas Rangetop
9
It is the responsibility of the installer to make certain that the range top is properly
adjusted at the time of installation. Situations caused by improper adjustments or
improper installation are not covered under the warranty. Any expenses incurred due to
such situations will not be paid by the manufacturer of the appliance.
GAS RANGETOP SPECIFICATIONS
Installation without a range hood
Note: All the measurement was based on 24” (61 cm) deep cabinet
This range top may be installed directly adjacent to existing 36” (91.4 cm) high base cabinets.
• The range top CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall
appliances, or other side vertical surfaces above 36” (91.4 cm) high. There must be a
minimum of 6” (15.2 cm) side clearance from the
Range top to such combustible surfaces above the 36” (91.4 cm) counter height.
• Within the 6” (15.2 cm) side clearance to combustible vertical surfaces above 36” (91.4
cm), the maximum wall cabinet depth must be 13” (33.0 cm) and wall cabinets within this
6” (15.2 cm) side clearance must be 18” (45.7 cm)
above the 36” (91.4 cm) high countertop.
• Wall cabinets above the range top must be a minimum of 42” (106.7 cm) above the range top
cooking surface for the full width of the rangetop. This minimum height requirement does not
apply if a range top hood is installed over the cooking surface.
Thor Kitchen Gas Rangetop
10
Installation with a range hood
Note: Minimum clearance for back wall is 0” with backsplash (backguard) or high shelf.
If a range hood is installed above the range top, maintain a 30” (76.2 cm) minimum clearance
between the rangetop and the bottom of the range hood.
The range hood must exhaust outside.
For best smoke elimination, the minimum clearance of the range hood should be installed
30” to 36” above the rangetop surface. Recommended CFM should be 600 CFM for the 30”
range top.
Do not install with a downdraft ventilation system
Installation in an island
Note: There must be a minimum of 6” (15.2 cm) clearance from rear of range top to a
combustible wall. Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances to non-combustible materials must be approved
by the authority having jurisdiction.
• This range top may be installed directly adjacent to existing 36” (91.4 cm) high base cabinets.
• The range top CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall
appliances, or other side vertical surfaces above 36” (91.4 cm) high. There must be a
minimum of 6” (15.2 cm) side clearance from the range top to such combustible surfaces
above the 36” (91.4 cm) counter height.
• Within the 6” (15.2 cm) side clearance to combustible vertical surfaces above 36” (91.4
cm), the maximum wall cabinet depth must be 13” (33.0 cm) and wall cabinets within this
6” (15.2 cm) side clearance must be 18” (45.7 cm) above the 36” (91.4 cm) high
countertop.
• Wall cabinets above the range top must be a minimum of 42” (106.7 cm) above the
range top cooking surface for the full width of the range top. This minimum height
requirement does not apply if a range top hood is installed over the cooking surface.
Thor Kitchen Gas Rangetop
10
ELECTRICAL REQUIREMENTS
Thor Kitchen Gas Rangetop requires 110 volts, 50/60 Hz electrical supply to operate the ignition
system. The power cord is a 3-prong grounding plug. The plug must be plugged into a mating
outlet.
Make sure there is a power outlet within the reach of the range top’s power supply cable (within
36 "/30 cm from the right side of the range top). The outlet should be accessible with the range
top installed.
Thor Kitchen Gas Rangetop must be properly grounded for safe operation. DO NOT ground the
rangetop to any of gas line/ gas pipe.
Thor Kitchen Gas Rangetop
11
PRODUCT DIMENSION
Make sure the countertop cut-out follows the dimensions given in the illustration below.
HRT3003U 30-inch Rangetop
Product Dimension
Back Layout from the back panel – Regulator is located on the back left of the range top (back
right if you see from the front)
Thor Kitchen Gas Rangetop
12
HRT3618U 36-inch Rangetop
Product Dimension
Back Layout from the back panel – Regulator is located on the back left of the range top (back
right if you see from the front)
Thor Kitchen Gas Rangetop
13
HRT4806U 48-inch Rangetop
Product Dimension
Back Layout from the back panel – Regulator is located on the back left of the range top (back
right if you see from the front)
Thor Kitchen Gas Rangetop
14
Thor Kitchen Gas Rangetop
15
Thor Kitchen Gas Rangetop
16
RANGETOP INSTALLATION
Installation and service must be performed by a qualified installer, service agency or
the gas supplier.
Remove the rangetop from its package and set aside all burners, burner caps and cooking
grates.
Gently slide in the range top half into the cut-out, make sure your gas connection and
electrical power plug are properly installed.
Once this is done, you’re now ready to slide the rangetop all the way back to the wall.
Install all burners and burner caps
Install all grates.
Thor Kitchen Gas Rangetop
17
CONNECTING GAS TO RANGE TOP
This range top is designed to operate at a pressure of 4” of water column on natural gas
or 10” of water column on propane gas (LPG).
This rangetop can be convert for use on Liquid propane gas (LPG). When using this range top
on LPG gas, conversion must be made by a qualified installer before attempting to operate
the range top on that gas. LP kit can be purchase from authorized Thor Kitchen dealer or
contact customer service for further assistant.
For correct operation, the pressure of natural gas supplied to the regulator should be
between 4” and 5” of water column. For LP gas, the pressure supplied must be between 10”
and 12” of water column.
When checking for correct operation of the regulator, the inlet pressure must be at least 1”
more than the operating manifold pressure as given above.
The pressure regulator located at the inlet of the range top manifold must remain in the
supply line regardless of Natural (NG) or Liquid Propane (LP) gas is being used.
A flexible metal appliance connector used to connect the range top to the gas supply should
be 3 feet/91.4 cm max. in length for easy installation. In Canada, flexible connectors should
be single wall metal connectors less than 6 feet/182.9 cm in length.
Shut off the main gas supply valve before removing the old cooking appliance (if applicable)
and leave it off until the new hook-up has been completed. Don’t forget to relight the pilots
on other gas appliances when you turn the gas back on.
Because hard piping restricts movement of the range top, the use of a CSA certified flexible
metal appliance connector is recommended unless local codes require a hard-piped
connection. Never reuse an old connector when installing a new range top. If the hard piping
method is used, you must carefully align the pipe.
To prevent gas leaks, use pipe joint compound resistant to NG gases on all male external pipe
threads.
1. In an easily accessible location, install a service manual gas shut off valve. Be sure
everyone operating the range top knows where and how to shut off the gas supply to
the cook top.
2. Use a flexible gas line to connect to the 1/2” fitting, located on the bottom right hand
corner underneath the range top.
Thor Kitchen Gas Rangetop
18
3. When all connections have been made, be sure all range top controls are in the off
position and turn on the main gas supply valve. Check for gas leaks by using a 75% water, 25%
dish washing soap solution. If a gas leak is present, shut off gas immediately, tighten all
connections, and retest for leaks.
Any opening in the wall behind the appliance and in the floor under the appliance shall be
sealed.
GUIDELINES FOR USING RANGE TOP BURNERS
There are dual burners have the same low turn-down setting (SIM) for gentle. Use the SIM
setting for melting chocolate and butter, cooking rice and delicate sauces, simmering soups
and stews, and keeping cooked food hot.
Never leave the range top unattended when in use. Boil over causes smoking and greasy
spills that may ignite.
Never allow flames to extend beyond cookware or curl up its sides. This could discolor and
damage the utensil and you may get burned touching a hot handle.
Keep handles out of the way. Turn handles so that they don’t extend over the edge of the
range or another burner that is on.
Take care when deep-frying. Oil or fat can overheat very quickly, particularly on a high setting.
Make sure that all burner parts are properly in place. Incorrectly or incompletely assembled
burners may produce dangerous flames. See’ Replacing the burner parts’ in ‘Care and
cleaning’.
Keep the burners clean. Especially after a spill or boil over, make sure you clean the affected
burners before using them again. Food residue may clog the igniter and the notches of the
flame spreader, stopping the burner from functioning correctly. See ‘Care and cleaning’ for
instructions.
Check that the burner flames are regular. They should be blue with no yellow tipping,
and burn without fluttering all around the burner cap. If not, see ‘Troubleshooting’ for
advice.
Thor Kitchen Gas Rangetop
16
SURFACE BURNER IGNITION
To light the top burners, push and turn the appropriate control knob counterclockwise to the
“HI” position. You will hear a clicking noise the sound of the electric spark igniting the burner.
Once burner ignition has been achieved, then turn the burner control knob to adjust the desired
heat setting.
NOTE: When one burner is turned to the “HI” position, the burner igniters will park. Do not
attempt to disassemble or clean around any burner while another burner is on. Do not touch
any burner cap, burner base, or igniter while the igniters are sparking.
FOR THE MODELS WITH GRIDDLE
Before Using the Griddle
1. Clean the griddle thoroughly with warm, soapy water to remove dust or any protective coating.
2. Rinse with clean water and wipe off to dry with soft, clean, lint-free cloth.
3. A stainless-steel cover that is sized to fit on top of the surface when the griddle is not
being used is provided. Please note that the cover must be removed before turning the
griddle on.
4. Make sure the grease tray is under the front edge of the griddle. Position the tray under
the griddle overhang to catch grease or food residue.
Use of the griddle
1. Push and turn the control knob counterclockwise to the preferred cooking temperature.
2. Preheat the griddle for at least 15 minutes. The LED light above the griddle knob (griddle light) will be
turning on when the griddle burner is on.
3. When the griddle is preheated to the desired temperature, the griddle light will be turning off. The
Griddle light cycles on and off like the oven cycling light. It’s not a pre-heat light.
4. The front of the griddle will be cooler than the back. Rear of griddle is cooking area while the front of
griddle if for warming area.
5. Butter or cooking oil could be added to the surface of the Griddle.
Thor Kitchen Gas Rangetop
16
The surface of the griddle is hot after use. Please allow sufficient time for the griddle to cool
prior to cleaning.
TROUBLESHOOTING TIPS
Symptom
Possible Cause
Solution
Burners will not light.
Burner parts or igniters may
be wet, dirty or misaligned.
Check that the burner parts are
clean, dry and correctly
assembled. Check that the
igniters are clean and dry.
Top burner will not stay
lit
Failed thermocouple
Replace thermocouple
Flames do not burn
all
around the
burner
cap.
Burner parts may be dirty or
misaligned.
See “Care and Cleaning”
instructions.
Burner flames are very
large and yellow.
Burner bezel ports are
clogged. Burner ports or
burner caps are not
positioned properly.
Range top is being operated
with the wrong type of gas.
Regulator is not Installed,
is faulty, or is set for the
wrong type of gas.
Clean burner bezel ring ports
with straightened paper clip,
needle, or wire.
Remove and carefully re-
install burner bezel and
caps.
Ensure that the type of range top
matches the gas supply.
Check installation, replace
regulator, or set regulator for
proper gas.
Igniters are sparking but
burners are not igniting.
Gas shut-off valve is in the
“OFF” position.
Turn shut-off valve to the “ON”
position.
Thor Kitchen Gas Rangetop
17
Symptom
Possible Cause
Solution
Burner flame goes out at
low setting.
Low gas pressure.
Air intake holes around
burners are obstructed.
Contact gas company.
Remove obstruction from air
intake holes.
The flames have
suddenly gone out.
A draft or spill has
extinguished the
flame.
Turn the burners off, cleaning the
burners
And sump area.
Once clean reignite top burners.
No ignition spark
Dead batteries or ignition
module failed.
Replace batteries and attempt
ignition. If
There is still no spark ignition, the
range top burners can still be
used.
To light them:
1.) Holding a lit match to the
flame spreader, push in on the
control knob and turn
counterclockwise to LIGHT.
2.) When the flame is burning all
the way around the burner, you
may adjust the heat.
“Cracking” or “popping”
sound is heard coming
from rangetop
This is the sound of metal
heating and cooling.
This is normal.
Thor Kitchen Gas Rangetop
18
WARRANTY AND SERVICE
This product has been manufactured by Thor group.
Thor Group disclaims all express warranties except for the following:
This warranty applies to products purchased and located in the United States. Products purchased
or located outside this area are excluded.
The warranty does not apply to damage resulting from abuse, accident, natural disaster, loss
of electrical power to the product for any reason, alteration, outdoor use, improper
installation, and improper operation, repair or service of the product by anyone other than
an authorized Thor Group, service agency or representative.
WARRANTIES AND DURATION
2-year warranty for Parts and Labor.
If your Thor Kitchen product is used in other than Single Family Residential Usage, this will be
considered commercial usage and product will carry a 6-month parts and labor warranty (6-
month Parts Warranty for the products with parts labor warranty only) from the date of
purchase.
Implied warranties terminate upon expiration of the limited warranty. Some states do not
allow limitations on how long implied warranty lasts, so the above limitation may not apply
to your implied warranty.
Thor Group will pay for:
1. All repair labor and cost of replacement parts found to be defective due to material and
workmanship. Service must be provided by a Thor Group Authorized Service Agency during
normal working hours.
2. For any question regarding our product or need for service, please contact us at 1-877-
288-8099 during regular business hour.
Thor Group will not pay for:
1. Service to instruct you on how to use your range to correct house wiring, replace or
repair house fuses. Service to correct the installation of your range.
2. Repairs when your range is used for other than normal, single-family household use or
when it is used in a manner that is contrary to published user or operator instructions
and/or installation instructions.
Thor Kitchen Gas Rangetop
19
3. Cosmetic damage, including chips, dents, scratches or other damage to the finish of your
range, unless such damage results from defects in materials or workmanship and is reported
to Thor Group within 30 days from the date of purchase.
Thor Kitchen Gas Rangetop
20
4. Costs associated with the removal from your home of your range for repairs. This range is
designed to be repaired in your home and only in-home service is covered by this
warranty.
5. Damage resulting from misuse, alteration, accident, abuse, fire, flood, acts of God,
improper installation, installation not in accordance with electrical, or use of
consumables or cleaning products not approved by Thor Group.
6. Service to repair or replace consumable parts. Consumable parts are not included in the
warranty coverage.
7. The removal and re-installation of your range if it is installed in an inaccessible location
or is not installed in accordance with published installation instructions.
8. This warranty is void if the factory applied serial number has been altered or removed
from your range.
9. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
10. Expenses for travel and transportation for product service if your range is located in a
remote area where service by an authorized service provider is not available.
The warranty applies to appliances purchased and used for personal, family or household
purposes only. It does not cover appliances used for commercial applications.
Should the appliance be sold by the original purchaser during the warranty period, the warranty
shall extend to the new owner until the expiration date of the original purchaser’s warranty
period.
Warranty and Product Registration
Thor Group is not responsible for incidental or consequential damages. Under no circumstances
will Thor Group’s liability exceed the cost that you paid for the product. Some states do not
allow
the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state. Whenever you call our customer service at 877-
288-8099 (Thor Kitchen product) for technical information and parts sales in the United States
or
to request service for your appliance, please have your complete model number and serial
number ready. The model and serial number can be found on the product data plate.
Warranty Notification:
Thor Kitchen Gas Rangetop
21
Thor Kitchen Appliance is designed for Single Family Residential Personal Use.
If your Thor Kitchen product is used in other than Single Family Residential Personal Usage, this
will be considered commercial usage and product will carry a 6-month parts and labor warranty
(6-
month Parts Warranty for the products with parts warranty only) from the date of purchase.
For any warranty inquiries, please contact:
+1 877-288-8099
service@thorgroup.us
Thor Kitchen Gas Rangetop
20
WARRANTY AND PRODUCT REGISTRATION
Thor Group is not responsible for incidental or consequential damages. Under no
circumstances will Thor Group ’s liability exceeds the cost that you paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from
state to state. Whenever you call our customer service at 1-877-288-8099 for technical
information and parts sales in the United States or to request service for your appliance, please
have your complete model number and serial number ready. The model and serial number can
be found on the product data plate. Please enter the information requested in the spaces
provided.
Purchaser Purchase Date
Model Number Serial No.
Where Purchased
E-mail Address
**Note: You must provide proof of purchase to access your Thor Kitchen warranty service.
Appendix
Rubber Pad Installation on Back Panel.
To Prevent the range too close to the wall, there are 2 plastic
pads offered with the user's manual, please find the
accessories and follow the below steps:
1. check the installation kit packed with manual.
2* screws
2* rubber pad
2. Install the 2 rubber pad as showed above.
