Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY:
temp/bmer
auto
hi []med
Io
]
V ON-OFF A FAN SPEED
fitter
reset
steep
YOU WILL SEE:
temp/timer
auto
hi [] fitterreed
lo reset
V 0N-0FF A FAN SPEED steep
DO THIS:
PRESSAND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
TO TURN UNIT OFF:
temp/b_rler
auto 1
hi [] fittermed
lo reset
V ON=OFF A FAN SPEED steep
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
YOU WILL SEE:
temp/timer auto 1lo reset
V 0N-OFF A FAN SPEED steep
DO THIS:
PRESS
ON/OFF BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
Now thatyou have masteredtheoperatingprocedure,here are more featuresinyourcontrolthatyou shouldbecome familiarwith.
//_ • The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
• There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
• The control will maintain the set temperature within 1 degrees Celsius, between 16 °C and 32 °C.
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
Fresh Air Vent Control
The FreshAirVent allowstheairconditionerto:
i. Recirculateinsideair- Vent Closed(see Fig.i)
2. Exchange airfrom the room -Vent Open (see Fig.2)
Figure 1 (VENT CLOSED)
Figure 2 (VENT OPEN)
@2009 Electrolux Home Products, Inc. All rights reserved.
9
Loading ...
Loading ...
Loading ...