Loading ...
Loading ...
Loading ...
Fig. 3
A
B
C
Fig. 1
A
D
B
C
23.9 in.
11.8 in.
Fig. 2
Pulls out up to 7.3 in.
3
PACKAGE CONTENTS
Part Description Quantity
A
B
C
1
1
2
D
E
F
2
1
2
Fan body
Speed button
Expandable panels
Feet
Screw
Right and Left intake/exhaust control lever
Part Description Quantity
A
B
D
E
C
F
HARDWARE CONTENTS
Quantity
Picture
(Shown to size)
ST2.9x9.5
Screw
2
Part
AA
Description
• Push the feet (B) into the fan body (A) and snap together.
(Fig. 1). Fasten the two screws (D)from the bottom of the
feet.
• This window fan has been designed to fit double-hung,
slider and casement windows with minimum opennings
of 24.4 in. wide and 13 in. high. (Fig. 2)
• This fan is designed and recommended for use with your
window screen in place.
1. With the window fully open, set the fan in the window
with front (A) of fan facing the INSIDE.
2. Hold fan with one hand while adjusting panels (B) with
the other. Before closing window, pull open locks (C)
located at top and bottom on right/left side on fan, and
adjust expandable panel, if necessary.
3. Close the window on top of the fan with the bottom
edge of the window behind the lip of fan housing.
FOR DOUBLE-HUNG TYPE WINDOWS (Fig.3)
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...