Loading ...
Loading ...
Loading ...
INTRODUCTION
Table of Contents Page #
Important Safeguards ....................................................................... 2
Special Cord Set Instructions ........................................................... 3
Precautions ...................................................................................... 3
Introduction .................................................................................... 4
Diagram of Parts ............................................................................. 4
Clean Your Electric Kettle Before First Use ..................................... 5
Using Your Electric Kettle ............................................................... 5
If The Kettle Does Boil Dry ............................................................... 6
Filter Instructions ............................................................................ 7
Filter Removal/Cleaning/Refitting ................................................... 7
Care and Cleaning ........................................................................... 8
Limited Warranty ............................................................................ 9
4
Diagram of Parts
Handle
Digital Temperature
Display
Illuminated Power
Button
Temperature
Control Buttons
Lid Release
Spout with
Removable,
Washable,
Anti-Scale Filter
(not shown)
Power Base with
Cord Storage and
Cable Exit
Multi-directional
Power Base for
Left- or Right-
Handed use
Water Level
Indicator (not
shown)
Clean your electric kettle before first use
1. Wash the inside of the kettle and lid with mild detergent and water.
Rinse each thoroughly. Do not immerse the kettle or power base in
water or any other liquid. These items are not dishwasher safe.
2. Fill the electric kettle with fresh water to the “MAX” water level
mark. Plug power base into power outlet. Place kettle into power
base. NOTE: the temperature display will illuminate and display the
default temperature setting of 212°F. Turn kettle ON by pressing
down on the power button. The power light will pulse indicating the
kettle heater is ON. Let the water boil. NOTE: Kettle will shut off
when it reaches the set temperature of 212°F.
3. When the water and unit have cooled, discard the water. Rinse with
cold water and repeat.
4. Your electric kettle is now ready for use.
Using your Electric Kettle
1. Position the power base on a flat, heat resistant surface, as close as
possible to a power outlet.
2. Follow cord routing in power base according to exit patterns. Proper
cord routing will result in the power base laying flat when kettle is
placed in base. DO not operate kettle if power base is not flat. If
power base is not flat, remove kettle from power base and repeat
cord placement instructions.
3. To fill with water, open the lid. Fill the electric kettle with water to
the desired level. NOTE: Do not exceed the “MAX” water level
mark indicated on the electric kettle.
4. Plug the electric cord into an electric outlet. Digital display will read
212°F. Change temperature by pressing the temperature change
buttons. Press Power Button to start the heating process. Power
Button will pulse until the set temperature is reached. NOTE: Once
set temperature is reached, the kettle will automatically shut off.
Display will stay illuminated for 10 minutes while displaying the
current water temperature. NOTE: Lid should always be firmly
closed. The electric kettle will not turn off if the lid is left open.
5
BVST-EK5967_11EM1.indd 4-5 11/2/11 9:07 AM
Loading ...
Loading ...
Loading ...