Loading ...
Loading ...
Loading ...
www.BISSELL.com
9
Maintenance: Cleaning the Separator
Maintenance: Replace the Brush & Belt
Maintenance: Clearing a Clog
Unplug vacuum, turn over and
unscrew Philips head screws
to remove bottom cover.
Model 2111 has 5 screws and
model 2110 has 6 screws.
Lift roller straight
out. If the belt is not
broken, remove roller
from inside of the
looped belt.
Replace the brush roll and
belt by looping the belt over
the motor shaft and the brush
roll. Line up the end caps
and pull the brush forward
into place. This will stretch
the belt. Once the brush roll
is installed, place the bottom
cover back on and replace
the screws.
Remove the
separator by
twisting to the
left then pull it
out through the
bottom of the
tank. Rinse and
dry all sections
of dirt
container with
paper towel.
Model 2111
Model 2110
Remove the hose
from the back of the
vacuum by twisting
it to the left. Remove
any debris that may
have gotten clogged.
screw
air path
Check the foot hose on
the back of your vacuum
down towards the bottom.
If necessary, remove the
screw from the foot hose
and check for clogs.
Check the air passageway on
the bottom of your vacuum.
Remove the bottom cover and
the brush. Remove any debris.
1
1
1
3
3
2
2
2
Press the
tank release
button.
Pull handle
to lift dirt
container
away from
vacuum.
Loading ...
Loading ...
Loading ...