Loading ...
Loading ...
Loading ...
DRYERUSE
I
Explosion Hazard
Keep flammabme materiaBs and vapors, such as
gaso_}ne, away from dryer.
Do not dry anyth[ng that has ever had anything
flammabBe on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire°
This booklet covers several different models. Your dryer may not
have all the cycles and features described.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
3. Turn the Cycle Control knob to the recommended cycle for the
type of load being dried. Use the Energy Preferred Automatic
Setting to dry most heavy to medium weight fabrics.
4. (OPTIONAL) If your dryer has aTemperature selector, set it to
the recommended setting for the type of fabric being dried.
See Dryer Cycle Descriptions (separate sheet) for temperature
suggestions. On some models, temperature is included in the
cycle selections.
5. (OPTIONAL) Your dryer may have a WRINKLE PREVENT
setting. When you are unable to remove a load from the dryer
as soon as it stops, wrinkles can form. This feature
periodically tumbles, rearranges and fluffs the load without
heat to help avoid wrinkling.
6. (OPTIONAL) Your dryer may have an End of Cycle Signal as
part of the Push To Start button. This signal is helpful when
drying items that should be removed from the dryer as soon
as it stops. Turn the PUSH TO START button to ON or OFR
The signal will sound only if the selector is set to On.
7. If desired, add fabric softener sheet. Follow package
instructions.
8. Press PUSH TO START.
Fire Hazard
No washer can compmetemyremove oH.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycme.
Failure to follow these instructions can reeumt in death
or fire.
How Automatic Drying Works
During the Automatic Drying Cycle, the exhaust temperature of
the dryer determines the drying time and dryness levels. A
thermostat signals the Cycle Control Knob when to move into
Cool Down. The drying time for an Automatic Drying Cycle
depends on load type and load size. When you are drying a large
or heavy load, the Cycle Control Knob may take a long time
before it begins to advance into Cool Down. Automatic Drying
Cycle takes the guesswork out of drying time and enhances fabric
care. The amount of time that is displayed is the estimated time
remaining in the cycle.
Stopping and Restarting
You can stop your dryer anytime during a cycle,
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFE
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
Close the door. Select a new cycle and temperature (if desired).
Press PUSH TO START.
Loading ...
Loading ...
Loading ...