Loading ...
Loading ...
Loading ...
5.1 NOZZLE MAINTENANCE
5
11
If there is too much pump pressure, the nozzle can
become clogged, you can feel a pulsing sensation while
you pull the gun trigger.
5.1.1 REMOVE THE NOZZLE
1. Pull back the quick-connect collar on the spray
wand.
2. Remove the nozzle from the spary wand.
5.1.2 CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool to clean
the spray tip.
2. Flush and clean the unwanted materials out of the
nozzle with the garden hose.
3. Install the clean nozzle to the spray wand.
6 TRANSPORTATION AND
STORAGE
WARNING
Disconnect the power cord before transportation and
storage.
6.1 MOVE THE MACHINE
• Point the spray wand in a safe direction.
• Only hold the machine with the handgrip.
6.2 STORE THE MACHINE
WARNING
Make sure that the gun, the high pressure hose and
the pump are dry.
WARNING
Make sure that children cannot come near the
machine.
NOTE
Use a recommended pump protector to prevent cold
weather damage during storage in winter.
• Disconnect the garden hose from machine.
• Wind the power cord and the high pressure hose.
• Clean housing and the plastic components with a
moist and soft cloth.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
• replace the damaged parts.
• tighten the bolts.
• speak to a person of an approved service
center.
• Store the machine in a dry, isolated and frost-free
area.
7 TROUBLESHOOTING
PROBLEM POSSIBLE
CAUSE
SOLUTION
The motor does
not start.
The power
switch is off.
Set the power
switch to the
“ON” ( | ) posi-
tion.
You do not plug
the power cord.
Connect the
power cord to
the power sup-
ply.
Electrical outlet
does not supply
sufficient power.
Try another elec-
trical outlet.
The circuit
breaker is trip-
ped.
Let it cool, and
start the ma-
chine again.
The power
switch is on, but
you do not pull
the gun trigger.
Pull the gun trig-
ger.
The machine
does not get
high pressure.
The diameter of
garden hose is
too small.
Replace with a
1” (25 mm) or
5/8” (16 mm)
garden hose.
The garden hose
is blocked.
Make sure that
the garden hose
is free from
blockage.
The water supply
is not sufficient.
Open the water
suppy fully.
You do not in-
stall the nozzle
onto the spray
wand.
Install the nozzle
onto the spray
wand.
The water intake
filter is blocked.
Remove the filter
and make it
clean in warm
water.
10
English
EN
Loading ...
Loading ...
Loading ...