Loading ...
Loading ...
Loading ...
21
Using your water dispenser
Dispensing
Your water dispenser has been designed for one-handed
operation.
To dispense water push the dispensing pad gently, using a glass
or container. This pad requires only a gentle press to activate.
When you dispense water, a light will appear above the
dispensing area, and on the display screen. The water fill icon
will also appear.
To stop the flow of water, simply pull your glass away from the
dispensing pad.
Please remember that pressing very hard against the dispensing
pad will not make the dispenser operate faster or produce
greater quantities of water.
First use
After installation, on the first use, allow approximately a one minute delay while the dispensing
pad is pushed until water is dispensed. This will allow the water tank to fill completely.
After you fill the tank for the first time, dispense and discard approximately 3 litres (3 qt) of
water stopping intermittently to flush the tank out.
Important!
To avoid damage to property or personal injury do not put hands, fingers or objects up the
dispenser opening.
Please note that once installation is complete a few drips may appear out of the dispenser over
the next few days as the remaining trapped air is cleared.
Fig.20 Water Dispenser
Loading ...
Loading ...
Loading ...