Loading ...
Loading ...
Loading ...
6 7
PARTS & FEATURES
OPERATING INSTRUCTIONS
NOTE - If the refrigerator has been placed in a horizontal or tilted position for any period of time wait
24 hours before plugging the unit in.
• The settings of the temperature control are "0, 1, 2, 3, 4, 5, 6, 7." Adjust the temperature control to
the setting that best suits your needs. The setting of "4" should be appropriate for home or office use.
• Turning the temperature to “0” position will shut off the cooling cycle, but does not turn off the
electrical power to the unit.
NOTE
- Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to operate
properly if restarted too quickly.
- If the ambient temperature is too high, the refrigerator may not reach the desired target temperature.
- Large amounts of foods will lower the cooling efficiency of the appliance.
- Do not place the foods on the air outlet and leave spaces for airflow.
- If you choose to change the thermostat setting, adjust thermostat control one increment at a time.
Allow several hours for temperature to stabilize between adjustments.
REFRIGERATOR INTERIOR SHELF
1. Carefully tilt the shelf up and slide forward until the shelf has been completely removed.
2. Slide the shelf back to replace.
CARE AND CLEANING
CLEANING AND MAINTAINING
The refrigerator should be cleaned and maintained once a month. Before doing so, YOU MUST
UNPLUG THE REFRIGERATOR.
• Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water. Use sponge
or soft cloth, dampened with the cleaning solution to wipe down your refrigerator.
• Rinse with clean warm water and dry with a soft cloth,
• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents, solvents
or metal scouring pads. Some of these chemicals may dissolve, damage and/or discolor your
refrigerator.
DOOR GASKET
Clean door gaskets every three months according to general instructions. Gasket must be kept clean
and pliable to assure a proper seal.
- Petroleum jelly applied lightly on the hinge sides of gaskets will keep the gasket pliable and ensure a
good seal.
CAUTION - To avoid personal injury or product damage always read and follow manufacturer’s instruc-
tions and warnings before using any cleaning products.
WARNING - Always unplug your refrigerator before cleaning to avoid electric shock. Ignoring this
warning may result in death or injury.
VACATIONS
• Short vacations: Leave the appliance operating during vacations of less than 3 - 4 weeks.
• Long vacations: If the appliance will not be used for over one month, remove all items and unplug
the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the
door open slightly: blocking it open if necessary.
MOVING YOUR FRIDGE
1. Remove all contents and store properly.
2. Securely tape down all loose items inside your appliance.
3. Turn the leveling screws up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the unit stays in the upright position during transportation. Protect the outside with a
blanket or similar item.
POWER INTERRUPTION
In case of a power interruption/outage, unplug the power cord from the wall outlet. Replug the power
cord to the wall outlet once the power has been restored. For long period of power outage, inspect
and discard the spoiled or thawed foods from the refrigerator and freezer compartments. Clean the
refrigerator thoroughly before using again.
Temperature Control
Glass Shelves
Adjustable Leveling Legs
Hinge Cover
Door Shelf
Tall Bottle Storage
Can Dispenser
Loading ...